The Cam Follower,needle Bearing, cataloged under National Stock Number 3110-01-195-5147, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 28 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-01-195-5147 |
| Item Name | Cam Follower,needle Bearing |
| FSC / FSG | 3110 / 31 — Bearings, Antifriction, Unmounted |
| Status | ACTIVE |
| Bearing Seal Type | CONTACT |
| Lubrication Material | GREASE |
| Outer Ring Width | 0.5260 INCHES MINIMUM AND 0.5310 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RACE |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE END PLATE EXPOSED SURFACES |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE STUD |
| Thread Length | 0.4220 INCHES NOMINAL IN |
| Style Designator | CAM FOLLOWER |
| Material Document and Classification | SAE ASSN STD SINGLE MATERIAL RESPONSE ROLLER |
| Material Document and Classification | SAE ASSN STD SINGLE MATERIAL RESPONSE STUD |
| Material Document and Classification | SAE ASSN STD SINGLE MATERIAL RESPONSE OUTER RACE |
| Overall Outside Diameter | 0.9995 INCHES MINIMUM AND 1.0010 INCHES MAXIMUM IN |
| Features Provided | FLUSH LUBRICATION FITTING |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.438 INCHES IN |
| Specification/standard Data | 80205-NAS562 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Stud Length | 0.7345 INCHES NOMINAL IN |
| Alignment Type | RIGID |
| Surface Treatment | CADMIUM STUD |
| Surface Treatment | CHROMIUM OUTER RACE |
| Surface Treatment | CADMIUM END PLATE EXPOSED SURFACES |
| Seal Quantity | 2 |
| Thread Class | 3A A |
| Test Data Document | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Standard Tolerance Designation | AFBMA STD TOLERANCE FOR CAN FOLLWER NEEDLE BEARING |
| Thread Quantity Per Inch | 20 |
| Material | STEEL COMP E52100 ROLLER |
| Material | STEEL END PLATE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS562-7TEE5 | 3/2 Design control — primary reference U.S. Government activity |
NSN 3110-01-195-5147 is a Cam Follower,needle Bearing, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.
Key specifications for 3110-01-195-5147: Bearing Seal Type: CONTACT; Lubrication Material: GREASE; Outer Ring Width: 0.5260 INCHES MINIMUM AND 0.5310 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RACE. 28 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.