The Cam Follower,needle Bearing, cataloged under National Stock Number 3110-01-193-2478, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. The manufacturer of record is Anti-Friction Bearing Mfg Assn Inc the. Government technical data includes 28 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-01-193-2478 |
| Primary Part Number | HRS1CFR-5 |
| Item Name | Cam Follower,needle Bearing |
| FSC / FSG | 3110 / 31 — Bearings, Antifriction, Unmounted |
| Manufacturer | Anti-Friction Bearing Mfg Assn Inc the |
| Status | ACTIVE |
| Bearing Seal Type | CONTACT |
| Lubrication Material | GREASE |
| Outer Ring Width | 0.2760 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RACE |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE END PLATE |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE STUD |
| Thread Length | 0.3440 INCHES NOMINAL IN |
| Style Designator | CAM FOLLOWER |
| Material Document and Classification | SAE ASSN STD SINGLE MATERIAL RESPONSE ROLLER |
| Material Document and Classification | SAE ASSN STD SINGLE MATERIAL RESPONSE STUD |
| Material Document and Classification | SAE ASSN STD SINGLE MATERIAL RESPONSE OUTER RACE |
| Overall Outside Diameter | 0.4995 INCHES MINIMUM AND 0.5010 INCHES MAXIMUM IN |
| Features Provided | FLUSH LUBRICATION FITTING |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.190 INCHES IN |
| Specification/standard Data | 80205-NAS562 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Stud Length | 0.6565 INCHES NOMINAL IN |
| Alignment Type | RIGID |
| Surface Treatment | CADMIUM STUD |
| Surface Treatment | CADMIUM END PLATE |
| Surface Treatment | CHROMIUM OUTER RACE |
| Seal Quantity | 2 |
| Thread Class | 3A A |
| Test Data Document | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Standard Tolerance Designation | AFBMA STD TOLERANCE FOR CAN FOLLWER NEEDLE BEARING |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP E52100 ROLLER |
| Material | STEEL END PLATE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HRS1CFR-5 PRIMARY | Anti-Friction Bearing Mfg Assn Inc the (USA) |
| Reference | Meaning |
|---|---|
| NAS562-3FEE5 | 3/2 Design control — primary reference U.S. Government activity |
NSN 3110-01-193-2478 is a Cam Follower,needle Bearing, manufactured by Anti-Friction Bearing Mfg Assn Inc the, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.
NSN 3110-01-193-2478 has 1 manufacturer part number on file: HRS1CFR-5 (Anti-Friction Bearing Mfg Assn Inc the).
Key specifications for HRS1CFR-5: Bearing Seal Type: CONTACT; Lubrication Material: GREASE; Outer Ring Width: 0.2760 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RACE. 28 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.