The Bearing,ball,annular, cataloged under National Stock Number 3110-01-191-6374, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-01-191-6374 |
| Item Name | Bearing,ball,annular |
| FSC / FSG | 3110 / 31 — Bearings, Antifriction, Unmounted |
| Status | ACTIVE |
| Lubrication Material | OIL AND GREASE |
| Internal Clearance | 0.0003 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN |
| Flange Outside Diameter | 0.8690 INCHES MINIMUM AND 0.8700 INCHES MAXIMUM IN |
| Surface Finish | GROUND |
| Shield Quantity | 2 |
| Bore Shape | STRAIGHT |
| Load Direction | RADIAL |
| Alignment Type | RIGID |
| Flange Width | 0.0300 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM IN |
| Outer Ring Outside Diameter | 0.6248 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN |
| Bore Diameter | 0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN |
| Material | STEEL OUTER RING |
| Material | STEEL INNER RING |
| Material | STEEL COMP 430 RETAINER |
| Material | STEEL COMP 302 SHIELD |
| Lubrication Material Document and Classification | AS2844,FSCM 97424 MFR REF 1ST MATERIAL RESPONSE AND MIL-G-23827 MIL SPEC 2ND MATERIAL RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 5796595P3 | 3/2 Design control — primary reference U.S. Government activity |
NSN 3110-01-191-6374 is a Bearing,ball,annular, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.
Key specifications for 3110-01-191-6374: Lubrication Material: OIL AND GREASE; Internal Clearance: 0.0003 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN; Flange Outside Diameter: 0.8690 INCHES MINIMUM AND 0.8700 INCHES MAXIMUM IN; Surface Finish: GROUND. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.