The Cam Follower,needle Bearing, cataloged under National Stock Number 3110-01-134-5872, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 26 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-01-134-5872 |
| Item Name | Cam Follower,needle Bearing |
| FSC / FSG | 3110 / 31 — Bearings, Antifriction, Unmounted |
| Status | ACTIVE |
| Bearing Seal Type | CONTACT |
| Lubrication Material | GREASE |
| Outer Ring Width | 0.2810 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED |
| Surface Treatment Document and Classification | QQ-C-320,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING OUTSIDE DIAMETER |
| Thread Length | 0.3440 INCHES NOMINAL IN |
| Style Designator | CAM FOLLOWER |
| Material Document and Classification | 66 FED STD SINGLE MATERIAL RESPONSE ROLLER |
| Material Document and Classification | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| Material Document and Classification | 66 FED STD SINGLE MATERIAL RESPONSE STUD |
| Material Document and Classification | 66 FED STD SINGLE MATERIAL RESPONSE END PLATE |
| Overall Outside Diameter | 0.6875 INCHES NOMINAL IN |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.250 INCHES IN |
| Specification/standard Data | 80205-NAS562 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Stud Length | 0.7815 INCHES NOMINAL IN |
| Surface Treatment | CADMIUM EXPOSED SURFACES AS MOUNTED |
| Surface Treatment | CHROMIUM OUTER RING OUTSIDE DIAMETER |
| Seal Quantity | 2 |
| Thread Class | 3A A |
| Test Data Document | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Thread Quantity Per Inch | 28 |
| Material | PLASTIC POLYAMIDE NYLON OR PLASTIC ACETAL SEAL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Lubrication Material Document and Classification | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| Stud Diameter | 0.2500 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL Q — CCL Item — Commerce Control List |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS562-4R7 | 3/2 Design control — primary reference U.S. Government activity |
| 10107513 | 6/9 Informative reference only Nimikkeistokeskus Ncb Finland |
NSN 3110-01-134-5872 is a Cam Follower,needle Bearing, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.
Key specifications for 3110-01-134-5872: Bearing Seal Type: CONTACT; Lubrication Material: GREASE; Outer Ring Width: 0.2810 INCHES NOMINAL IN; Surface Treatment Document and Classification: QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED. 26 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 3110-01-134-5872 has DEMIL Code Q. Demilitarization may be required before disposal or transfer to non-military entities.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.