PartsTable TECHNICAL DATA SHEET
NSN 3110-01-122-1330Government record, cited

Cam Follower, Needle Bearing3110-01-122-1330

NSN 3110-01-122-1330 · NIIN 011221330
FSC 3110 — Bearings, Antifriction, Unmounted · FSG 31 — Bearings
Government record, cited
Also searched as  3110-01-122-1330 · 3110011221330 · NIIN 011221330 · 01-122-1330 · FSC 3110 Bearings, Antifriction, Unmounted · MS21432-5TEE8G · MS21432-5TEE8 · HRS3CTR8
Nearby stock numbers  ·
Features
  • Cam Follower,needle Bearing — FSC 3110
  • Bearing Seal Type: CONTACT
  • Lubrication Material: GREASE
  • Outer Ring Width: 0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING
  • Surface Treatment Document and Classification: QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROLLER
  • Surface Treatment Document and Classification: QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED
  • Thread Length: 0.3590 INCHES NOMINAL IN
Identification
  • NSN: 3110-01-122-1330
  • NIIN: 011221330
  • FSC: 3110 — Bearings, Antifriction, Unmounted
  • FSG: 31 — Bearings
General Description

The Cam Follower,needle Bearing, cataloged under National Stock Number 3110-01-122-1330, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 27 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3110-01-122-1330
Item NameCam Follower,needle Bearing
FSC / FSG3110 / 31 — Bearings, Antifriction, Unmounted
StatusACTIVE
Bearing Seal TypeCONTACT
Lubrication MaterialGREASE
Outer Ring Width0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING
Surface Treatment Document and ClassificationQQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROLLER
Surface Treatment Document and ClassificationQQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED
Thread Length0.3590 INCHES NOMINAL IN
Style DesignatorCAM FOLLOWER
Overall Outside Diameter0.7495 INCHES MINIMUM AND 0.7510 INCHES MAXIMUM IN
Thread DirectionRIGHT-HAND
Nominal Thread Size0.3125 INCHES IN
Stud Length0.8590 INCHES NOMINAL IN
Alignment TypeRIGID
Surface TreatmentCHROMIUM OUTER RING
Surface TreatmentCADMIUM EXPOSED SURFACES AS MOUNTED
Surface TreatmentCHROMIUM ROLLER
Seal Quantity2
Thread Class3A A
Thread Quantity Per Inch24
MaterialPLASTIC ACETAL OR PLASTIC POLYAMIDE NYLON SEAL
MaterialSTEEL COMP E52100 OR STEEL COMP E50100 OR STEEL COMP E51100 END PLATE
MaterialSTEEL COMP E52100 OR STEEL COMP E50100 OR STEEL COMP E51100 OUTER RACE
MaterialSTEEL COMP E52100 OR STEEL COMP E50100 OR STEEL COMP E51100 ROLLER
MaterialSTEEL COMP E52100 OR STEEL COMP E50100 OR STEEL COMP E51100 STUD
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Lubrication Material Document and ClassificationMIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
Stud Diameter0.3105 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
MS21432-5TEE8G 2/2 Government specification standardization
U.S. Government activity
MS21432-5TEE8 5/9 Secondary reference
U.S. Government activity
HRS3CTR8 5/9 Secondary reference
U.S. Government activity

Frequently Asked Questions

What is NSN 3110-01-122-1330?

NSN 3110-01-122-1330 is a Cam Follower,needle Bearing, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.

What are the specifications of 3110-01-122-1330?

Key specifications for 3110-01-122-1330: Bearing Seal Type: CONTACT; Lubrication Material: GREASE; Outer Ring Width: 0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING. 27 specifications are documented in the U.S. Government catalog.

Is NSN 3110-01-122-1330 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com