PartsTable TECHNICAL DATA SHEET
NSN 3110-01-118-4993Government record, cited

Bearing, Ball, Annular3110-01-118-4993

NSN 3110-01-118-4993 · NIIN 011184993 · Part number 2MM9104WI
Timken Co Div the Timken Company · FSC 3110 — Bearings, Antifriction, Unmounted · FSG 31 — Bearings · CAGE 21335
Government record, cited
NSN 3110-01-118-4993 — this item is cataloged by the U.S. Government under National Stock Number 3110-01-118-4993. Manufacturer of record part number: 2MM9104WI.
Also searched as  3110-01-118-4993 · 3110011184993 · NIIN 011184993 · 01-118-4993 · FSC 3110 Bearings, Antifriction, Unmounted · CAGE 21335 · 2MM9104WI · 2MM9104WI-FS160 · 2MM9104WI-CR-FS160
Nearby stock numbers  ·
Features
  • Bearing,ball,annular — FSC 3110
  • Retainer Fabrication Method: MOLDED
  • Lubrication Material: GREASE
  • Internal Fit-Up Designation: STANDARD
  • Surface Finish: GROUND
  • Style Designator: COUNTERBORED OUTER RING, NON-SEPARABLE
  • Overall Outside Diameter: 42.00 MILLIMETERS NOMINAL MM
  • Bore Shape: STRAIGHT
Identification
  • NSN: 3110-01-118-4993
  • NIIN: 011184993
  • FSC: 3110 — Bearings, Antifriction, Unmounted
  • FSG: 31 — Bearings
  • Primary part number: 2MM9104WI
  • Manufacturer: Timken Co Div the Timken Company
General Description

The Bearing,ball,annular, cataloged under National Stock Number 3110-01-118-4993, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. The manufacturer of record is Timken Co Div the Timken Company. Government technical data includes 16 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3110-01-118-4993
Primary Part Number2MM9104WI
Item NameBearing,ball,annular
FSC / FSG3110 / 31 — Bearings, Antifriction, Unmounted
ManufacturerTimken Co Div the Timken Company
StatusACTIVE
Retainer Fabrication MethodMOLDED
Lubrication MaterialGREASE
Internal Fit-Up DesignationSTANDARD
Surface FinishGROUND
Style DesignatorCOUNTERBORED OUTER RING, NON-SEPARABLE
Overall Outside Diameter42.00 MILLIMETERS NOMINAL MM
Bore ShapeSTRAIGHT
Contact Angle15.0 DEGREES NOMINAL
Load DirectionANGULAR
Standard Tolerance DesignationABEC NO.7
Bore Diameter20.00 MILLIMETERS NOMINAL MM
MaterialSTEEL OUTER RING
MaterialSTEEL INNER RING
MaterialSTEEL BALL
MaterialCOTTON RETAINER
Lubrication Material Document and ClassificationMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
2MM9104WI PRIMARY Timken Co Div the Timken Company (USA)
Reference documents
ReferenceMeaning
2MM9104WI-FS160 5/9 Secondary reference
Timken Co Div the Timken Company
2MM9104WI-CR-FS160 5/9 Secondary reference
Timken Co Div the Timken Company
No interchangeability data on file.
Other items in FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1938
BEARING,BALL,AIRFRAME
3110-00-001-4661
CONE AND ROLLERS,TAPERED ROLLER
3110-00-001-4662
CUP,TAPERED ROLLER BEARING
3110-00-001-4689
BEARING,BALL,ANNULAR
3110-00-001-4722
BEARING,BALL,ANNULAR

Frequently Asked Questions

What is NSN 3110-01-118-4993?

NSN 3110-01-118-4993 is a Bearing,ball,annular, manufactured by Timken Co Div the Timken Company, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.

What part numbers are listed for NSN 3110-01-118-4993?

NSN 3110-01-118-4993 has 1 manufacturer part number on file: 2MM9104WI (Timken Co Div the Timken Company).

What are the specifications of 2MM9104WI?

Key specifications for 2MM9104WI: Retainer Fabrication Method: MOLDED; Lubrication Material: GREASE; Internal Fit-Up Designation: STANDARD; Surface Finish: GROUND. 16 specifications are documented in the U.S. Government catalog.

Is NSN 3110-01-118-4993 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com