PartsTable TECHNICAL DATA SHEET
NSN 3110-01-117-5127Government record, cited

Bearing, Ball, Duplex3110-01-117-5127

NSN 3110-01-117-5127 · NIIN 011175127
FSC 3110 — Bearings, Antifriction, Unmounted · FSG 31 — Bearings
Government record, cited
Also searched as  3110-01-117-5127 · 3110011175127 · NIIN 011175127 · 01-117-5127 · FSC 3110 Bearings, Antifriction, Unmounted · 820-4551176-2 · 20208-L3C(DT)
Nearby stock numbers  ·
Features
  • Bearing,ball,duplex — FSC 3110
  • Surface Finish: GROUND
  • Special Test Features: SPECIAL QUALITY CONTROL TESTING
  • Criticality Code Justification: ZZZY
  • Style Designator: COUNTERBORED OUTER RINGS, NON-SEPARABLE, TANDEM MOUNTING
  • Material Document and Classification: UNABLE TO DECODE
  • Overall Outside Diameter: 3.1492 INCHES MINIMUM AND 3.1496 INCHES MAXIMUM IN
  • Load Direction: ANGULAR
Identification
  • NSN: 3110-01-117-5127
  • NIIN: 011175127
  • FSC: 3110 — Bearings, Antifriction, Unmounted
  • FSG: 31 — Bearings
General Description

The Bearing,ball,duplex, cataloged under National Stock Number 3110-01-117-5127, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3110-01-117-5127
Item NameBearing,ball,duplex
FSC / FSG3110 / 31 — Bearings, Antifriction, Unmounted
StatusACTIVE
Surface FinishGROUND
Special Test FeaturesSPECIAL QUALITY CONTROL TESTING
Criticality Code JustificationZZZY
Style DesignatorCOUNTERBORED OUTER RINGS, NON-SEPARABLE, TANDEM MOUNTING
Material Document and ClassificationUNABLE TO DECODE
Overall Outside Diameter3.1492 INCHES MINIMUM AND 3.1496 INCHES MAXIMUM IN
Load DirectionANGULAR
Test Data Document81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Bore Diameter1.5745 INCHES MINIMUM AND 1.5748 INCHES MAXIMUM IN
MaterialSTEEL COMP E52100 BALL
MaterialCOPPER ALLOY RETAINER
MaterialSTEEL COMP E52100 OUTER RING
MaterialSTEEL COMP E52100 INNER RING
Reference Number Differentiating CharacteristicsAS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS AND CERTIFIED FREE FROM MERCURY CONTAMINATION
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeY
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
3110-01-308-6086 POSSIBLE MATCH
BEARING,BALL,ANNULAR
Possible match (shared part number)
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
820-4551176-2 5/1 Secondary reference
U.S. Government activity
20208-L3C(DT) 3/9 Design control — primary reference
General Motors Corp Delco Moraine Ndh Div
Related Parts
3110-01-308-6086POSSIBLE MATCH
BEARING,BALL,ANNULAR

Frequently Asked Questions

What is NSN 3110-01-117-5127?

NSN 3110-01-117-5127 is a Bearing,ball,duplex, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.

What NSN replaces 3110-01-117-5127?

1 possible match (shared part number, not a government interchangeability claim): 3110-01-308-6086. Verify interchangeability with system specifications before substitution.

What are the specifications of 3110-01-117-5127?

Key specifications for 3110-01-117-5127: Surface Finish: GROUND; Special Test Features: SPECIAL QUALITY CONTROL TESTING; Criticality Code Justification: ZZZY; Style Designator: COUNTERBORED OUTER RINGS, NON-SEPARABLE, TANDEM MOUNTING. 14 specifications are documented in the U.S. Government catalog.

Is NSN 3110-01-117-5127 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com