PartsTable TECHNICAL DATA SHEET
NSN 3110-01-102-8509Government record, cited

Bearing, Ball, Duplex3110-01-102-8509

NSN 3110-01-102-8509 · NIIN 011028509
FSC 3110 — Bearings, Antifriction, Unmounted · FSG 31 — Bearings
Government record, cited
Also searched as  3110-01-102-8509 · 3110011028509 · NIIN 011028509 · 01-102-8509 · FSC 3110 Bearings, Antifriction, Unmounted · 930003 · SR1232PB31C7K58-2
Nearby stock numbers  ·
Features
  • Bearing,ball,duplex — FSC 3110
  • Retainer Fabrication Method: MACHINED
  • Bearing Preload Rating: 6.5 POUNDS NOMINAL LBS
  • Internal Clearance: 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
  • Surface Finish: GROUND
  • Shield Quantity: 2
  • Style Designator: COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
  • Material Document and Classification: UNABLE TO DECODE
Identification
  • NSN: 3110-01-102-8509
  • NIIN: 011028509
  • FSC: 3110 — Bearings, Antifriction, Unmounted
  • FSG: 31 — Bearings
General Description

The Bearing,ball,duplex, cataloged under National Stock Number 3110-01-102-8509, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3110-01-102-8509
Item NameBearing,ball,duplex
FSC / FSG3110 / 31 — Bearings, Antifriction, Unmounted
StatusACTIVE
Retainer Fabrication MethodMACHINED
Bearing Preload Rating6.5 POUNDS NOMINAL LBS
Internal Clearance0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
Surface FinishGROUND
Shield Quantity2
Style DesignatorCOUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
Material Document and ClassificationUNABLE TO DECODE
Overall Outside Diameter0.9998 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
Load DirectionRADIAL
Bore Diameter0.7498 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
MaterialSTEEL COMP 440C INNER RING
MaterialSTEEL COMP 440C OUTER RING
MaterialPLASTIC PHENOLIC RETAINER
MaterialSTEEL COMP 440C BALL
MaterialSTEEL CORROSION RESISTING SHIELD
MaterialOIL LUBRICATING LUBRICATION
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL B — Remove Demilitarization Key Points
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5995-01-385-1476 POSSIBLE MATCH
CABLE ASSEMBLY,SPECIAL PURPOSE,E
Possible match (shared part number)
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
930003 7/2 Vendor item drawing reference
Lockheed Martin Corp Electronics and Missiles Div
SR1232PB31C7K58-2 3/2 Design control — primary reference
U.S. Government activity
Related Parts
5995-01-385-1476POSSIBLE MATCH
CABLE ASSEMBLY,SPECIAL PURPOSE,E

Frequently Asked Questions

What is NSN 3110-01-102-8509?

NSN 3110-01-102-8509 is a Bearing,ball,duplex, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.

What NSN replaces 3110-01-102-8509?

1 possible match (shared part number, not a government interchangeability claim): 5995-01-385-1476. Verify interchangeability with system specifications before substitution.

What are the specifications of 3110-01-102-8509?

Key specifications for 3110-01-102-8509: Retainer Fabrication Method: MACHINED; Bearing Preload Rating: 6.5 POUNDS NOMINAL LBS; Internal Clearance: 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN; Surface Finish: GROUND. 16 specifications are documented in the U.S. Government catalog.

Is NSN 3110-01-102-8509 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

What is the DEMIL code for NSN 3110-01-102-8509?

NSN 3110-01-102-8509 has DEMIL Code B. Demilitarization may be required before disposal or transfer to non-military entities.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com