The Bearing,ball,annular, cataloged under National Stock Number 3110-01-101-4592, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-01-101-4592 |
| Item Name | Bearing,ball,annular |
| FSC / FSG | 3110 / 31 — Bearings, Antifriction, Unmounted |
| Status | ACTIVE |
| Retainer Fabrication Method | PRESSED |
| Lubrication Material | OIL |
| Outer Ring Width | 0.1406 INCHES NOMINAL IN |
| Internal Clearance | 0.0002 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN |
| Internal Fit-Up Designation | STANDARD |
| Flange Outside Diameter | 0.4220 INCHES NOMINAL IN |
| Surface Finish | GROUND |
| Shield Quantity | 2 |
| Style Designator | NON-LOADING GROOVE, NON-SEPARABLE |
| Material Document and Classification | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Bore Shape | STRAIGHT |
| Load Direction | RADIAL |
| Flange Width | 0.0310 INCHES NOMINAL IN |
| Outer Ring Outside Diameter | 0.3750 INCHES NOMINAL IN |
| Standard Tolerance Designation | ABEC NO. 7P |
| Bore Diameter | 0.1250 INCHES NOMINAL IN |
| Material | STEEL COMP 440A OVERALL A |
| Lubrication Material Document and Classification | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| Inner Ring Width | 0.1718 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| SFR2-6PPEEK28/24 | 3/2 Design control — primary reference U.S. Government activity |
| SFR2-6PPEEK28 | 5/2 Secondary reference U.S. Government activity |
NSN 3110-01-101-4592 is a Bearing,ball,annular, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.
Key specifications for 3110-01-101-4592: Retainer Fabrication Method: PRESSED; Lubrication Material: OIL; Outer Ring Width: 0.1406 INCHES NOMINAL IN; Internal Clearance: 0.0002 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.