The Plate,retaining,bearing, cataloged under National Stock Number 3110-01-100-9029, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. The manufacturer of record is Naval Air Warfare Center Weapons Div. Government technical data includes 7 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-01-100-9029 |
| Primary Part Number | 4693095 |
| Item Name | Plate,retaining,bearing |
| FSC / FSG | 3110 / 31 — Bearings, Antifriction, Unmounted |
| Manufacturer | Naval Air Warfare Center Weapons Div |
| Status | ACTIVE |
| Length | 3.500 INCHES NOMINAL IN |
| Bolt Circle Hole Quantity | 2 |
| Mounting Hole Type | ROUND, UNTHREADED |
| Mounting Hole Diameter | 0.191 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN |
| Aperture Diameter | 1.500 INCHES NOMINAL IN |
| Width | 2.500 INCHES NOMINAL IN |
| Material | ALUMINUM ALLOY 6061 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 4693095 PRIMARY | Naval Air Warfare Center Weapons Div (USA) |
| Reference | Meaning |
|---|---|
| 4693095-1 | 5/9 Secondary reference Naval Air Warfare Center Weapons Div |
NSN 3110-01-100-9029 is a Plate,retaining,bearing, manufactured by Naval Air Warfare Center Weapons Div, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.
NSN 3110-01-100-9029 has 1 manufacturer part number on file: 4693095 (Naval Air Warfare Center Weapons Div).
Key specifications for 4693095: Length: 3.500 INCHES NOMINAL IN; Bolt Circle Hole Quantity: 2; Mounting Hole Type: ROUND, UNTHREADED; Mounting Hole Diameter: 0.191 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN. 7 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.