PartsTable TECHNICAL DATA SHEET
NSN 3110-01-094-9309Government record, cited

Bearing, Roller, Rod End3110-01-094-9309

NSN 3110-01-094-9309 · NIIN 010949309
FSC 3110 — Bearings, Antifriction, Unmounted · FSG 31 — Bearings
Government record, cited
Also searched as  3110-01-094-9309 · 3110010949309 · NIIN 010949309 · 01-094-9309 · FSC 3110 Bearings, Antifriction, Unmounted
Nearby stock numbers  ·
Features
  • Bearing,roller,rod End — FSC 3110
  • Shank Diameter: 0.7480 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM IN
  • Lubrication Material: GREASE
  • Outer Ring Width: 0.5570 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN
  • Shank Bore Depth: 2.5000 INCHES NOMINAL IN
  • Style Designator: SINGLE ROW, NEEDLE ROLLER
  • Material Document and Classification: 66 FED STD SINGLE MATERIAL RESPONSE ROLLER
  • Material Document and Classification: 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
Identification
  • NSN: 3110-01-094-9309
  • NIIN: 010949309
  • FSC: 3110 — Bearings, Antifriction, Unmounted
  • FSG: 31 — Bearings
General Description

The Bearing,roller,rod End, cataloged under National Stock Number 3110-01-094-9309, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 27 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3110-01-094-9309
Item NameBearing,roller,rod End
FSC / FSG3110 / 31 — Bearings, Antifriction, Unmounted
StatusACTIVE
Shank Diameter0.7480 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM IN
Lubrication MaterialGREASE
Outer Ring Width0.5570 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN
Shank Bore Depth2.5000 INCHES NOMINAL IN
Style DesignatorSINGLE ROW, NEEDLE ROLLER
Material Document and Classification66 FED STD SINGLE MATERIAL RESPONSE ROLLER
Material Document and Classification66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
Material Document and Classification66 FED STD SINGLE MATERIAL RESPONSE INNER RING
Material Document and Classification66 FED STD SINGLE MATERIAL RESPONSE RETAINING PLATE
Material Document and ClassificationCVA1-585,COND C-1,FSCM 80378 MFR REF SINGLE MATERIAL RESPONSE ROD END BODY
Shank Bore Diameter0.4375 INCHES NOMINAL IN
Overall Outside Diameter1.1800 INCHES NOMINAL IN
Features ProvidedEXTERNAL LUBRICATION FITTING AND LUBRICATION HOLE AND LUBRICATION GROOVE
Shank StyleHOLLOW
Alignment TypeRIGID
Surface TreatmentCADMIUM OUTER RING
Surface TreatmentCADMIUM INNER RING
Surface TreatmentCADMIUM AND CHROMIUM ROD END BODY
Surface TreatmentCADMIUM RETAINING PLATE
Test Data Document81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 80378-CVA 13-23 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Bore Diameter0.3743 INCHES MINIMUM AND 0.3747 INCHES MAXIMUM IN
Length From Bore Center to Shank End3.2200 INCHES MINIMUM AND 3.2600 INCHES MAXIMUM IN
MaterialSTEEL COMP E52100 ROLLER
MaterialSTEEL COMP E52100 INNER RING
MaterialSTEEL COMP 4340 ROD END BODY
MaterialSTEEL COMP E52100 RETAINING PLATE
Lubrication Material Document and ClassificationMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE OR 215-00613,A-7A,FSCM 800378 MFR REF SINGLE MATERIAL RESPONSE OR 215-00613,A-7B FSCM 80378 MFR REF SINGLE MATERIAL RESPONSE OR 216-00613,A-7D FSCM 80378 MFR REF SINGLE MATERIAL RESPONSE OR 218-00613,A-7E,FSCM 80378 MFR REF SINGLE MATERIAL RESPONSE A
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
215-70429-4 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1938
BEARING,BALL,AIRFRAME
3110-00-001-4661
CONE AND ROLLERS,TAPERED ROLLER
3110-00-001-4662
CUP,TAPERED ROLLER BEARING
3110-00-001-4689
BEARING,BALL,ANNULAR
3110-00-001-4722
BEARING,BALL,ANNULAR

Frequently Asked Questions

What is NSN 3110-01-094-9309?

NSN 3110-01-094-9309 is a Bearing,roller,rod End, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.

What are the specifications of 3110-01-094-9309?

Key specifications for 3110-01-094-9309: Shank Diameter: 0.7480 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM IN; Lubrication Material: GREASE; Outer Ring Width: 0.5570 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN; Shank Bore Depth: 2.5000 INCHES NOMINAL IN. 27 specifications are documented in the U.S. Government catalog.

Is NSN 3110-01-094-9309 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com