PartsTable TECHNICAL DATA SHEET
NSN 3110-01-087-9395Government record, cited

Bearing, Ball, Annular3110-01-087-9395

NSN 3110-01-087-9395 · NIIN 010879395
FSC 3110 — Bearings, Antifriction, Unmounted · FSG 31 — Bearings
Government record, cited
Also searched as  3110-01-087-9395 · 3110010879395 · NIIN 010879395 · 01-087-9395 · FSC 3110 Bearings, Antifriction, Unmounted · 720281-1 · 720281-1 · 720281-1 · SR2-5EEC5K13/9
Nearby stock numbers  ·
Features
  • Bearing,ball,annular — FSC 3110
  • Retainer Fabrication Method: PRESSED
  • Lubrication Material: OIL
  • Outer Ring Width: 0.1084 INCHES MINIMUM AND 0.1094 INCHES MAXIMUM IN
  • Internal Clearance: 0.0001 INCHES MINIMUM RADIAL AND 0.0003 INCHES MAXIMUM RADIAL IN
  • Surface Finish: GROUND
  • Style Designator: NON-LOADING GROOVE, NON-SEPARABLE
  • Material Document and Classification: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Identification
  • NSN: 3110-01-087-9395
  • NIIN: 010879395
  • FSC: 3110 — Bearings, Antifriction, Unmounted
  • FSG: 31 — Bearings
General Description

The Bearing,ball,annular, cataloged under National Stock Number 3110-01-087-9395, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3110-01-087-9395
Item NameBearing,ball,annular
FSC / FSG3110 / 31 — Bearings, Antifriction, Unmounted
StatusACTIVE
Retainer Fabrication MethodPRESSED
Lubrication MaterialOIL
Outer Ring Width0.1084 INCHES MINIMUM AND 0.1094 INCHES MAXIMUM IN
Internal Clearance0.0001 INCHES MINIMUM RADIAL AND 0.0003 INCHES MAXIMUM RADIAL IN
Surface FinishGROUND
Style DesignatorNON-LOADING GROOVE, NON-SEPARABLE
Material Document and ClassificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Overall Outside Diameter0.4373 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM IN
Bore ShapeSTRAIGHT
Load DirectionRADIAL
Test Data Document73030-720281-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
Standard Tolerance DesignationABEC NO.7
Bore Diameter0.1248 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
MaterialSTEEL COMP 440A OVERALL A
Lubrication Material Document and ClassificationMIL-L-7870 MIL SPEC SINGLE MATERIAL RESPONSE
Inner Ring Width0.1396 INCHES MINIMUM AND 0.1406 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL Q — CCL Item — Commerce Control List
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
720281-1 7/2 Vendor item drawing reference
Hamilton Sundstrand Corporation Dba Collins Aerospace
720281-1 3/2 Design control — primary reference
U.S. Government activity
720281-1 3/2 Design control — primary reference
U.S. Government activity
SR2-5EEC5K13/9 5/9 Secondary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1938
BEARING,BALL,AIRFRAME
3110-00-001-4661
CONE AND ROLLERS,TAPERED ROLLER
3110-00-001-4662
CUP,TAPERED ROLLER BEARING
3110-00-001-4689
BEARING,BALL,ANNULAR
3110-00-001-4722
BEARING,BALL,ANNULAR

Frequently Asked Questions

What is NSN 3110-01-087-9395?

NSN 3110-01-087-9395 is a Bearing,ball,annular, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.

What are the specifications of 3110-01-087-9395?

Key specifications for 3110-01-087-9395: Retainer Fabrication Method: PRESSED; Lubrication Material: OIL; Outer Ring Width: 0.1084 INCHES MINIMUM AND 0.1094 INCHES MAXIMUM IN; Internal Clearance: 0.0001 INCHES MINIMUM RADIAL AND 0.0003 INCHES MAXIMUM RADIAL IN. 16 specifications are documented in the U.S. Government catalog.

Is NSN 3110-01-087-9395 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

What is the DEMIL code for NSN 3110-01-087-9395?

NSN 3110-01-087-9395 has DEMIL Code Q. Demilitarization may be required before disposal or transfer to non-military entities.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com