PartsTable TECHNICAL DATA SHEET
NSN 3110-01-087-0313Government record, cited

Bearing, Ball, Annular3110-01-087-0313

NSN 3110-01-087-0313 · NIIN 010870313 · Part number 701022
Army Weapons Command Attn Amswe-Ree-S · FSC 3110 — Bearings, Antifriction, Unmounted · FSG 31 — Bearings · CAGE 21450
Government record, cited
NSN 3110-01-087-0313 — this item is cataloged by the U.S. Government under National Stock Number 3110-01-087-0313. Manufacturer of record part number: 701022.
Also searched as  3110-01-087-0313 · 3110010870313 · NIIN 010870313 · 01-087-0313 · FSC 3110 Bearings, Antifriction, Unmounted · CAGE 21450 · 701022 · 3110010870313
Nearby stock numbers  ·
Features
  • Bearing,ball,annular — FSC 3110
  • Retainer Fabrication Method: PRESSED
  • Lubrication Material: GREASE
  • Internal Fit-Up Designation: STANDARD
  • Surface Finish: GROUND
  • Shield Quantity: 2
  • Style Designator: NON-LOADING GROOVE, NON-SEPARABLE
  • Overall Outside Diameter: 2.1649 INCHES MINIMUM AND 2.1654 INCHES MAXIMUM IN
Identification
  • NSN: 3110-01-087-0313
  • NIIN: 010870313
  • FSC: 3110 — Bearings, Antifriction, Unmounted
  • FSG: 31 — Bearings
  • Primary part number: 701022
  • Manufacturer: Army Weapons Command Attn Amswe-Ree-S
General Description

The Bearing,ball,annular, cataloged under National Stock Number 3110-01-087-0313, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. The manufacturer of record is Army Weapons Command Attn Amswe-Ree-S. Government technical data includes 14 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3110-01-087-0313
Primary Part Number701022
Item NameBearing,ball,annular
FSC / FSG3110 / 31 — Bearings, Antifriction, Unmounted
ManufacturerArmy Weapons Command Attn Amswe-Ree-S
StatusACTIVE
Retainer Fabrication MethodPRESSED
Lubrication MaterialGREASE
Internal Fit-Up DesignationSTANDARD
Surface FinishGROUND
Shield Quantity2
Style DesignatorNON-LOADING GROOVE, NON-SEPARABLE
Overall Outside Diameter2.1649 INCHES MINIMUM AND 2.1654 INCHES MAXIMUM IN
Features ProvidedSNAP RING-GROOVE MOUNTING
Bore ShapeSTRAIGHT
Load DirectionRADIAL
Test Data Document21450-CAAX8 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
Standard Tolerance DesignationAFBMA STD TOLERANCE FOR BALLS, GRADE 5
Bore Diameter1.1807 INCHES MINIMUM AND 1.1811 INCHES MAXIMUM IN
MaterialSTEEL OVERALL
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
701022 Army Weapons Command Attn Amswe-Ree-S (USA)
Reference documents
ReferenceMeaning
3110010870313 6/9 Informative reference only
E.c.a Etablissement Central Des Approvisionnements Des Forces Armees Royales

Frequently Asked Questions

What is NSN 3110-01-087-0313?

NSN 3110-01-087-0313 is a Bearing,ball,annular, manufactured by Army Weapons Command Attn Amswe-Ree-S, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.

What part numbers are listed for NSN 3110-01-087-0313?

NSN 3110-01-087-0313 has 1 manufacturer part number on file: 701022 (Army Weapons Command Attn Amswe-Ree-S).

What are the specifications of 701022?

Key specifications for 701022: Retainer Fabrication Method: PRESSED; Lubrication Material: GREASE; Internal Fit-Up Designation: STANDARD; Surface Finish: GROUND. 14 specifications are documented in the U.S. Government catalog.

Is NSN 3110-01-087-0313 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com