The Bearing,ball,annular, cataloged under National Stock Number 3110-01-082-6242, is classified within Federal Supply Class 3110 (No Item Name Available) of the Bearings group. The primary manufacturer of record is Ddc Pertec Peripherals Corp. Government technical data includes 13 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 8 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-01-082-6242 |
| Primary Part Number | 613-0026 |
| Item Name | Bearing,ball,annular |
| FSC / FSG | 3110 / 31 — No Item Name Available |
| Manufacturer | Ddc Pertec Peripherals Corp |
| Status | ACTIVE |
| Retainer Fabrication Method | PRESSED |
| Standard Tolerance Designation | ABEC NO.3 |
| Surface Finish | GROUND |
| Shield Quantity | 2 |
| Bore Shape | STRAIGHT |
| Internal Clearance | 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN |
| Lubrication Material | GREASE |
| Material | STEEL CORROSION RESISTING SHIELD |
| Material | STEEL COMP 440C INNER RING |
| Material | STEEL COMP 440C BALL |
| Material | STEEL COMP 440C OUTER RING |
| Overall Outside Diameter | 0.5000 INCHES NOMINAL IN |
| Lubrication Material Document and Classification | ANDOK C,CAGEC 51058 MFR REF SINGLE MATERIAL RESPONSE |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
NSN 3110-01-082-6242 is a Bearing,ball,annular, manufactured by Ddc Pertec Peripherals Corp, classified under FSC 3110 (No Item Name Available). Status: active.
NSN 3110-01-082-6242 has 2 cross-referenced part numbers: 613-0026 (Ddc Pertec Peripherals Corp), 104357 (Ddc Pertec Peripherals Corp).
There are 8 known substitutes for 3110-01-082-6242: 3020-00-130-0830, 1005-00-136-2278, 5310-00-137-6808 and 5 more. Verify interchangeability with system specifications before substitution.
Key specifications for 613-0026: Special Features: INTERNAL DOWEL PIN; Retainer Fabrication Method: PRESSED; Standard Tolerance Designation: ABEC NO.3; Surface Finish: GROUND. 14 total characteristics are documented in the Federal Logistics Information System.