PartsTable TECHNICAL DATA SHEET
NSN 3110-01-055-3939Government record, cited

Bearing, Ball, Annular3110-01-055-3939

NSN 3110-01-055-3939 · NIIN 010553939 · Part number 9106PP
Timken Co Div the Timken Company · FSC 3110 — Bearings, Antifriction, Unmounted · FSG 31 — Bearings · CAGE 21335
Government record, cited
NSN 3110-01-055-3939 — this item is cataloged by the U.S. Government under National Stock Number 3110-01-055-3939. Manufacturer of record part number: 9106PP.
Also searched as  3110-01-055-3939 · 3110010553939 · NIIN 010553939 · 01-055-3939 · FSC 3110 Bearings, Antifriction, Unmounted · CAGE 21335 · 9106PP · C5M30000
Nearby stock numbers  ·
Features
  • Bearing,ball,annular — FSC 3110
  • Retainer Fabrication Method: PRESSED
  • Bearing Seal Type: CONTACT
  • Lubrication Material: GREASE
  • Internal Fit-Up Designation: STANDARD
  • Surface Finish: GROUND
  • Special Test Features: SPECIAL QUALITY CONTROL TESTING
  • Criticality Code Justification: MATT AND SPCL
Identification
  • NSN: 3110-01-055-3939
  • NIIN: 010553939
  • FSC: 3110 — Bearings, Antifriction, Unmounted
  • FSG: 31 — Bearings
  • Primary part number: 9106PP
  • Manufacturer: Timken Co Div the Timken Company
General Description

The Bearing,ball,annular, cataloged under National Stock Number 3110-01-055-3939, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. The manufacturer of record is Timken Co Div the Timken Company. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3110-01-055-3939
Primary Part Number9106PP
Item NameBearing,ball,annular
FSC / FSG3110 / 31 — Bearings, Antifriction, Unmounted
ManufacturerTimken Co Div the Timken Company
StatusACTIVE
Retainer Fabrication MethodPRESSED
Bearing Seal TypeCONTACT
Lubrication MaterialGREASE
Internal Fit-Up DesignationSTANDARD
Surface FinishGROUND
Special Test FeaturesSPECIAL QUALITY CONTROL TESTING
Criticality Code JustificationMATT AND SPCL
Style DesignatorNON-LOADING GROOVE, NON-SEPARABLE
Overall Outside Diameter55.0 MILLIMETERS NOMINAL MM
Bore ShapeSTRAIGHT
Load DirectionRADIAL
Seal Quantity2
Test Data Document81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Standard Tolerance DesignationABEC NO.1
Bore Diameter30.0 MILLIMETERS NOMINAL MM
MaterialSTEEL OUTER RING
MaterialSTEEL INNER RING
MaterialRUBBER SYNTHETIC SEAL
MaterialSTEEL RETAINER
MaterialSTEEL BALL
Lubrication Material Document and ClassificationDOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeY
Cross-Reference Index
Part NumberManufacturer
9106PP Timken Co Div the Timken Company (USA)
Reference documents
ReferenceMeaning
C5M30000 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1938
BEARING,BALL,AIRFRAME
3110-00-001-4661
CONE AND ROLLERS,TAPERED ROLLER
3110-00-001-4662
CUP,TAPERED ROLLER BEARING
3110-00-001-4689
BEARING,BALL,ANNULAR
3110-00-001-4722
BEARING,BALL,ANNULAR

Frequently Asked Questions

What is NSN 3110-01-055-3939?

NSN 3110-01-055-3939 is a Bearing,ball,annular, manufactured by Timken Co Div the Timken Company, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.

What part numbers are listed for NSN 3110-01-055-3939?

NSN 3110-01-055-3939 has 1 manufacturer part number on file: 9106PP (Timken Co Div the Timken Company).

What are the specifications of 9106PP?

Key specifications for 9106PP: Retainer Fabrication Method: PRESSED; Bearing Seal Type: CONTACT; Lubrication Material: GREASE; Internal Fit-Up Designation: STANDARD. 21 specifications are documented in the U.S. Government catalog.

Is NSN 3110-01-055-3939 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com