PartsTable TECHNICAL DATA SHEET
NSN 3110-01-054-1678Government record, cited

Bearing, Ball, Annular3110-01-054-1678

NSN 3110-01-054-1678 · NIIN 010541678
FSC 3110 — Bearings, Antifriction, Unmounted · FSG 31 — Bearings
Government record, cited
Also searched as  3110-01-054-1678 · 3110010541678 · NIIN 010541678 · 01-054-1678 · FSC 3110 Bearings, Antifriction, Unmounted · 2106872 · 4773L10X1E
Nearby stock numbers  ·
Features
  • Bearing,ball,annular — FSC 3110
  • Retainer Fabrication Method: STAMPED
  • Lubrication Material: GREASE
  • Bearing Preload Rating: 1.0 POUNDS NOMINAL LBS
  • Internal Clearance: 0.0001 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
  • Surface Finish: GROUND
  • Shield Quantity: 2
  • Style Designator: NON-LOADING GROOVE, NON-SEPARABLE
Identification
  • NSN: 3110-01-054-1678
  • NIIN: 010541678
  • FSC: 3110 — Bearings, Antifriction, Unmounted
  • FSG: 31 — Bearings
General Description

The Bearing,ball,annular, cataloged under National Stock Number 3110-01-054-1678, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3110-01-054-1678
Item NameBearing,ball,annular
FSC / FSG3110 / 31 — Bearings, Antifriction, Unmounted
StatusACTIVE
Retainer Fabrication MethodSTAMPED
Lubrication MaterialGREASE
Bearing Preload Rating1.0 POUNDS NOMINAL LBS
Internal Clearance0.0001 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
Surface FinishGROUND
Shield Quantity2
Style DesignatorNON-LOADING GROOVE, NON-SEPARABLE
Material Document and ClassificationMIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING
Material Document and ClassificationMIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL
Material Document and ClassificationMIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING
Overall Outside Diameter80.0 MILLIMETERS NOMINAL MM
Features ProvidedSNAP RING-GROOVE MOUNTING
Bore ShapeSTRAIGHT
Load DirectionRADIAL
Test Data Document81349-MIL-B-22446 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Standard Tolerance DesignationABEC NO.1
Bore Diameter50.0 MILLIMETERS NOMINAL MM
MaterialSTEEL COMP E52100 BALL
MaterialSTEEL RETAINER
MaterialSTEEL COMP E52100 OUTER RING
MaterialSTEEL SHIELD
MaterialSTEEL COMP E52100 INNER RING
Lubrication Material Document and ClassificationMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
2106872 7/2 Vendor item drawing reference
Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier
4773L10X1E 3/9 Design control — primary reference
General Motors Corp Delco Moraine Ndh Div
No interchangeability data on file.
Other items in FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1938
BEARING,BALL,AIRFRAME
3110-00-001-4661
CONE AND ROLLERS,TAPERED ROLLER
3110-00-001-4662
CUP,TAPERED ROLLER BEARING
3110-00-001-4689
BEARING,BALL,ANNULAR
3110-00-001-4722
BEARING,BALL,ANNULAR

Frequently Asked Questions

What is NSN 3110-01-054-1678?

NSN 3110-01-054-1678 is a Bearing,ball,annular, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.

What are the specifications of 3110-01-054-1678?

Key specifications for 3110-01-054-1678: Retainer Fabrication Method: STAMPED; Lubrication Material: GREASE; Bearing Preload Rating: 1.0 POUNDS NOMINAL LBS; Internal Clearance: 0.0001 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN. 23 specifications are documented in the U.S. Government catalog.

Is NSN 3110-01-054-1678 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com