PartsTable TECHNICAL DATA SHEET
NSN 3110-01-053-2938Government record, cited

Bearing, Ball, Annular3110-01-053-2938

NSN 3110-01-053-2938 · NIIN 010532938
FSC 3110 — Bearings, Antifriction, Unmounted · FSG 31 — Bearings
Government record, cited
Also searched as  3110-01-053-2938 · 3110010532938 · NIIN 010532938 · 01-053-2938 · FSC 3110 Bearings, Antifriction, Unmounted · 801140-1 · 16756355-008 · MIL-B-81793/8 · M81793/08LB4C5N1F1 · SFR6SSWG-33
Nearby stock numbers  ·
Features
  • Bearing,ball,annular — FSC 3110
  • Retainer Fabrication Method: PRESSED
  • Lubrication Material: GREASE
  • Internal Clearance: 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
  • Flange Outside Diameter: 0.9690 INCHES NOMINAL IN
  • Surface Finish: GROUND
  • Shield Quantity: 2
  • Style Designator: NON-LOADING GROOVE, NON-SEPARABLE
Identification
  • NSN: 3110-01-053-2938
  • NIIN: 010532938
  • FSC: 3110 — Bearings, Antifriction, Unmounted
  • FSG: 31 — Bearings
General Description

The Bearing,ball,annular, cataloged under National Stock Number 3110-01-053-2938, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3110-01-053-2938
Item NameBearing,ball,annular
FSC / FSG3110 / 31 — Bearings, Antifriction, Unmounted
StatusACTIVE
Retainer Fabrication MethodPRESSED
Lubrication MaterialGREASE
Internal Clearance0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
Flange Outside Diameter0.9690 INCHES NOMINAL IN
Surface FinishGROUND
Shield Quantity2
Style DesignatorNON-LOADING GROOVE, NON-SEPARABLE
Bore ShapeSTRAIGHT
Load DirectionRADIAL
Flange Width0.0620 INCHES NOMINAL IN
Outer Ring Outside Diameter0.8750 INCHES NOMINAL IN
Standard Tolerance DesignationABEC NO. 7P
Bore Diameter0.3750 INCHES NOMINAL IN
MaterialSTEEL CORROSION RESISTING RETAINER
MaterialSTEEL CORROSION RESISTING SHIELD
Lubrication Material Document and ClassificationMIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL Q — CCL Item — Commerce Control List
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
801140-1 5/1 Secondary reference
U.S. Government activity
16756355-008 C/1 Advisory reference — outside the item-of-supply concept
Sypris Electronics, Llc Div Sypris Electronics, Llc - Colorado Field Services
MIL-B-81793/8 4/1 Identification reference
U.S. Government activity
M81793/08LB4C5N1F1 2/2 Government specification standardization
U.S. Government activity
SFR6SSWG-33 5/1 Secondary reference
Schaeffler Aerospace Usa Corp Div Schaeffler Aerospace Usa Corporation
M81793-DKJLAA03CF71AHS 5/9 Secondary reference
U.S. Government activity

Frequently Asked Questions

What is NSN 3110-01-053-2938?

NSN 3110-01-053-2938 is a Bearing,ball,annular, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.

What are the specifications of 3110-01-053-2938?

Key specifications for 3110-01-053-2938: Retainer Fabrication Method: PRESSED; Lubrication Material: GREASE; Internal Clearance: 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN; Flange Outside Diameter: 0.9690 INCHES NOMINAL IN. 16 specifications are documented in the U.S. Government catalog.

Is NSN 3110-01-053-2938 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

What is the DEMIL code for NSN 3110-01-053-2938?

NSN 3110-01-053-2938 has DEMIL Code Q. Demilitarization may be required before disposal or transfer to non-military entities.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com