PartsTable TECHNICAL DATA SHEET
NSN 3110-01-037-0529Government record, cited

Bearing, Ball, Rod End3110-01-037-0529

NSN 3110-01-037-0529 · NIIN 010370529
FSC 3110 — Bearings, Antifriction, Unmounted · FSG 31 — Bearings
Government record, cited
Also searched as  3110-01-037-0529 · 3110010370529 · NIIN 010370529 · 01-037-0529 · FSC 3110 Bearings, Antifriction, Unmounted
Nearby stock numbers  ·
Features
  • Bearing,ball,rod End — FSC 3110
  • Shank Diameter: 0.3650 INCHES MINIMUM AND 0.3850 INCHES MAXIMUM IN
  • Shank Thread Length: 0.7190 INCHES MINIMUM AND 0.7810 INCHES MAXIMUM IN
  • Retainer Fabrication Method: PRESSED
  • Width Across Flats: 0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM IN
  • Lubrication Material: GREASE
  • Outer Ring Width: 0.3180 INCHES MINIMUM AND 0.3380 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-416,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BALL
Identification
  • NSN: 3110-01-037-0529
  • NIIN: 010370529
  • FSC: 3110 — Bearings, Antifriction, Unmounted
  • FSG: 31 — Bearings
General Description

The Bearing,ball,rod End, cataloged under National Stock Number 3110-01-037-0529, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 28 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3110-01-037-0529
Item NameBearing,ball,rod End
FSC / FSG3110 / 31 — Bearings, Antifriction, Unmounted
StatusACTIVE
Shank Diameter0.3650 INCHES MINIMUM AND 0.3850 INCHES MAXIMUM IN
Shank Thread Length0.7190 INCHES MINIMUM AND 0.7810 INCHES MAXIMUM IN
Retainer Fabrication MethodPRESSED
Width Across Flats0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM IN
Lubrication MaterialGREASE
Outer Ring Width0.3180 INCHES MINIMUM AND 0.3380 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-416,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BALL
Surface Treatment Document and ClassificationQQ-P-416,CL 2 FED SPEC SINGLE TREATMENT RESPONSE INNER RING
Surface Treatment Document and ClassificationQQ-P-416,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING
Surface Treatment Document and ClassificationQQ-P-416,CL 2 FED SPEC SINGLE TREATMENT RESPONSE RETAINER
Surface Treatment Document and ClassificationQQ-P-416,CL 2 FED SPEC SINGLE TREATMENT RESPONSE SHAFT
Style DesignatorDOUBLE ROW, STAGGERED, BALL
Material Document and ClassificationMIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING
Material Document and ClassificationMIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL
Material Document and ClassificationMIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE SHAFT
Material Document and Classification66 FED STD SINGLE MATERIAL RESPONSE RETAINER
Material Document and ClassificationMIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING
Thread DirectionRIGHT-HAND
Nominal Thread Size0.250 INCHES IN
Self-Alignment Angle10.00 DEGREES NOMINAL
Shank StyleINTERNALLY THREADED W/BEAD
Alignment TypeSELF-ALIGNING
Surface TreatmentCADMIUM BALL
Surface TreatmentCADMIUM RETAINER
Surface TreatmentCADMIUM OUTER RING
Surface TreatmentCADMIUM INNER RING
Surface TreatmentCADMIUM SHAFT
Seal Quantity2
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
205-060-733-7 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1938
BEARING,BALL,AIRFRAME
3110-00-001-4661
CONE AND ROLLERS,TAPERED ROLLER
3110-00-001-4662
CUP,TAPERED ROLLER BEARING
3110-00-001-4689
BEARING,BALL,ANNULAR
3110-00-001-4722
BEARING,BALL,ANNULAR

Frequently Asked Questions

What is NSN 3110-01-037-0529?

NSN 3110-01-037-0529 is a Bearing,ball,rod End, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.

What are the specifications of 3110-01-037-0529?

Key specifications for 3110-01-037-0529: Shank Diameter: 0.3650 INCHES MINIMUM AND 0.3850 INCHES MAXIMUM IN; Shank Thread Length: 0.7190 INCHES MINIMUM AND 0.7810 INCHES MAXIMUM IN; Retainer Fabrication Method: PRESSED; Width Across Flats: 0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM IN. 28 specifications are documented in the U.S. Government catalog.

Is NSN 3110-01-037-0529 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com