PartsTable TECHNICAL DATA SHEET
NSN 3110-01-022-2042Government record, cited

Bearing, Roller, Rod End3110-01-022-2042

NSN 3110-01-022-2042 · NIIN 010222042 · Part number SFP4.7B1.501
Rexnord Industries, Llc Div Aerosspace Bearing Operation · FSC 3110 — Bearings, Antifriction, Unmounted · FSG 31 — Bearings · CAGE 77896
Government record, cited
NSN 3110-01-022-2042 — this item is cataloged by the U.S. Government under National Stock Number 3110-01-022-2042. Manufacturer of record part number: SFP4.7B1.501.
Also searched as  3110-01-022-2042 · 3110010222042 · NIIN 010222042 · 01-022-2042 · FSC 3110 Bearings, Antifriction, Unmounted · CAGE 77896 · SFP4.7B1.501 · 204-001-064 · YS112AB MODIFIED · 214-001-066-1 · 214-001-066-001
Nearby stock numbers  ·
Features
  • Bearing,roller,rod End — FSC 3110
  • Shank Diameter: 0.6100 INCHES MINIMUM AND 0.6200 INCHES MAXIMUM IN
  • Shank Thread Length: 1.0940 INCHES MINIMUM AND 1.1540 INCHES MAXIMUM IN
  • Bearing Seal Type: CONTACT
  • Lubrication Material: GREASE
  • Outer Ring Width: 0.3450 INCHES MINIMUM AND 0.3600 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES
  • Shield Quantity: 2
Identification
  • NSN: 3110-01-022-2042
  • NIIN: 010222042
  • FSC: 3110 — Bearings, Antifriction, Unmounted
  • FSG: 31 — Bearings
  • Primary part number: SFP4.7B1.501
  • Manufacturer: Rexnord Industries, Llc Div Aerosspace Bearing Operation
General Description

The Bearing,roller,rod End, cataloged under National Stock Number 3110-01-022-2042, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. The manufacturer of record is Rexnord Industries, Llc Div Aerosspace Bearing Operation. Government technical data includes 28 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3110-01-022-2042
Primary Part NumberSFP4.7B1.501
Item NameBearing,roller,rod End
FSC / FSG3110 / 31 — Bearings, Antifriction, Unmounted
ManufacturerRexnord Industries, Llc Div Aerosspace Bearing Operation
StatusACTIVE
Shank Diameter0.6100 INCHES MINIMUM AND 0.6200 INCHES MAXIMUM IN
Shank Thread Length1.0940 INCHES MINIMUM AND 1.1540 INCHES MAXIMUM IN
Bearing Seal TypeCONTACT
Lubrication MaterialGREASE
Outer Ring Width0.3450 INCHES MINIMUM AND 0.3600 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES
Shield Quantity2
Style DesignatorSINGLE ROW, CONCAVE ROLLERS
Material Document and ClassificationMIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE ROLLER
Material Document and ClassificationQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE SHIELD
Material Document and ClassificationMIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING
Material Document and ClassificationMIL-S-7393 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY
Overall Outside Diameter0.9700 INCHES NOMINAL IN
Thread DirectionRIGHT-HAND
Nominal Thread Size0.438 INCHES IN
Self-Alignment Angle15.00 DEGREES NOMINAL
Shank StyleINTERNALLY THREADED
Alignment TypeSELF-ALIGNING
Surface TreatmentCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
Seal Quantity2
Thread Class3B
Thread Quantity Per Inch20
Bore Diameter0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
Length From Bore Center to Shank End1.8600 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM IN
MaterialSTEEL COMP 430 SHIELD
MaterialSTEEL COMP E52100 ROLLER
MaterialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL
MaterialSTEEL COMP E52100 INNER RING
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
SFP4.7B1.501 Rexnord Industries, Llc Div Aerosspace Bearing Operation (USA)
Reference documents
ReferenceMeaning
204-001-064 5/2 Secondary reference
U.S. Government activity
YS112AB MODIFIED 5/9 Secondary reference
Rexnord Industries, Llc Div Aerosspace Bearing Operation
214-001-066-1 3/2 Design control — primary reference
U.S. Government activity
214-001-066-001 5/2 Secondary reference
U.S. Government activity

Frequently Asked Questions

What is NSN 3110-01-022-2042?

NSN 3110-01-022-2042 is a Bearing,roller,rod End, manufactured by Rexnord Industries, Llc Div Aerosspace Bearing Operation, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.

What part numbers are listed for NSN 3110-01-022-2042?

NSN 3110-01-022-2042 has 1 manufacturer part number on file: SFP4.7B1.501 (Rexnord Industries, Llc Div Aerosspace Bearing Operation).

What are the specifications of SFP4.7B1.501?

Key specifications for SFP4.7B1.501: Shank Diameter: 0.6100 INCHES MINIMUM AND 0.6200 INCHES MAXIMUM IN; Shank Thread Length: 1.0940 INCHES MINIMUM AND 1.1540 INCHES MAXIMUM IN; Bearing Seal Type: CONTACT; Lubrication Material: GREASE. 28 specifications are documented in the U.S. Government catalog.

Is NSN 3110-01-022-2042 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com