PartsTable
Technical Data Sheet
PartsTable / MRO / 3110-01
3110-01 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include material: ALUMINUM, body_style: TUBE TYPE, shaft_type: ROUND SINGLE ACTUATOR, body_length: 0.719 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.375 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-610-5851, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 3110-01
NSN: 5330-00-610-5851
FSC: 5330
CAGE: 47496 — THE DEWEY ELECTRONICS CORPORATION DIV PITOMETER LOG DIVISION (USA)
SPECIFICATIONS
materialALUMINUM
body_styleTUBE TYPE
shaft_typeROUND SINGLE ACTUATOR
body_length0.719 INCHES NOMINAL IN
shaft_styleROUND, SLOTTED
shaft_length0.375 INCHES NOMINAL IN
thread_class2B
actuator_typeSINGLE SHAFT
body_diameter1.250 INCHES NOMINAL IN
terminal_typeTAB W/SCREW
thread_length0.469 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
overall_length1.250 INCHES NOMINAL IN
NSN5330-00-610-5851
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3110-01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
752-311001-001Interchangeable
interchangeable cross-reference
interchangeable
311-001Interchangeable
interchangeable cross-reference
interchangeable
4150-142PC33Interchangeable
interchangeable cross-reference
interchangeable
900J826PC6Interchangeable
interchangeable cross-reference
interchangeable
10-1157-2-1Interchangeable
interchangeable cross-reference
interchangeable
10-1157-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3110-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3110-01?
3110-01 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 3110-01?
There are 10 known substitutes for 3110-01: 752-311001-001, 311-001, 4150-142PC33 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3110-01?
3110-01 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-610-5851. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3110-01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026