PartsTable TECHNICAL DATA SHEET
NSN 3110-00-987-6711Government record, cited

Bearing, Ball, Annular3110-00-987-6711

NSN 3110-00-987-6711 · NIIN 009876711 · Part number PM207KE9201
Timken Co Div the Timken Company · FSC 3110 — Bearings, Antifriction, Unmounted · FSG 31 — Bearings · CAGE 21335
Government record, cited
NSN 3110-00-987-6711 — this item is cataloged by the U.S. Government under National Stock Number 3110-00-987-6711. Manufacturer of record part number: PM207KE9201.
Also searched as  3110-00-987-6711 · 3110009876711 · NIIN 009876711 · 00-987-6711 · FSC 3110 Bearings, Antifriction, Unmounted · CAGE 21335 · PM207KE9201 · 205-040-107 · 205-040-107-001 · F41207 · 205-040-107-1
Nearby stock numbers  ·
Features
  • Bearing,ball,annular — FSC 3110
  • Retainer Fabrication Method: PRESSED
  • Internal Clearance: 0.0090 INCHES NOMINAL AXIAL AND 0.0008 INCHES MINIMUM RADIAL AND 0.0012 INCHES MAXIMUM RADIAL IN
  • Surface Finish: GROUND
  • Style Designator: NON-LOADING GROOVE, NON-SEPARABLE
  • Material Document and Classification: 205-040-107,97499 MFR REF SINGLE MATERIAL RESPONSE BALL
  • Material Document and Classification: 205-040-107,97499 MFR REF SINGLE MATERIAL RESPONSE INNER RING
  • Material Document and Classification: 205-040-107,97499 MFR REF SINGLE MATERIAL RESPONSE OUTER RING
Identification
  • NSN: 3110-00-987-6711
  • NIIN: 009876711
  • FSC: 3110 — Bearings, Antifriction, Unmounted
  • FSG: 31 — Bearings
  • Primary part number: PM207KE9201
  • Manufacturer: Timken Co Div the Timken Company
General Description

The Bearing,ball,annular, cataloged under National Stock Number 3110-00-987-6711, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. The manufacturer of record is Timken Co Div the Timken Company. Government technical data includes 18 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3110-00-987-6711
Primary Part NumberPM207KE9201
Item NameBearing,ball,annular
FSC / FSG3110 / 31 — Bearings, Antifriction, Unmounted
ManufacturerTimken Co Div the Timken Company
StatusACTIVE
Retainer Fabrication MethodPRESSED
Internal Clearance0.0090 INCHES NOMINAL AXIAL AND 0.0008 INCHES MINIMUM RADIAL AND 0.0012 INCHES MAXIMUM RADIAL IN
Surface FinishGROUND
Style DesignatorNON-LOADING GROOVE, NON-SEPARABLE
Material Document and Classification205-040-107,97499 MFR REF SINGLE MATERIAL RESPONSE BALL
Material Document and Classification205-040-107,97499 MFR REF SINGLE MATERIAL RESPONSE INNER RING
Material Document and Classification205-040-107,97499 MFR REF SINGLE MATERIAL RESPONSE OUTER RING
Material Document and Classification205-040-107,97499 MFR REF SINGLE MATERIAL RESPONSE RETAINER
Overall Outside Diameter72.00 MILLIMETERS NOMINAL MM
Bore ShapeSTRAIGHT
Load DirectionRADIAL
Test Data Document38443-AQCP-2 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 38443-AIS-84A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 38443-AQCP-9A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 21335-APS-33A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 21335-APS-36A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). A
Standard Tolerance DesignationABEC NO.3
Bore Diameter35.00 MILLIMETERS NOMINAL MM
MaterialSTEEL COMP E52100 BALL
MaterialSTEEL COMP 1010 RETAINER
MaterialSTEEL COMP E52100 OUTER RING
MaterialSTEEL COMP E52100 INNER RING
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 2
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
3460-01-092-8889 POSSIBLE MATCH
CLAMP,MACHINE,HOLD DOWN
Possible match (shared part number)
3110-01-168-5660 POSSIBLE MATCH
BEARING,BALL,ANNULAR
Possible match (shared part number)
Cross-Reference Index
Part NumberManufacturer
PM207KE9201 PRIMARY Timken Co Div the Timken Company (USA)
207S Skf Usa Inc. (USA)
Reference documents
ReferenceMeaning
205-040-107 5/2 Secondary reference
U.S. Government activity
205-040-107-001 5/2 Secondary reference
U.S. Government activity
F41207 3/2 Design control — primary reference
U.S. Government activity
205-040-107-1 5/2 Secondary reference
U.S. Government activity
205-040-107 1/2 Source control — Government-approved source
U.S. Government activity
155113107 5/9 Secondary reference
Franklin Electric Co Inc
Related Parts
3460-01-092-8889POSSIBLE MATCH
CLAMP,MACHINE,HOLD DOWN
3110-01-168-5660POSSIBLE MATCH
BEARING,BALL,ANNULAR

Frequently Asked Questions

What is NSN 3110-00-987-6711?

NSN 3110-00-987-6711 is a Bearing,ball,annular, manufactured by Timken Co Div the Timken Company, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.

What part numbers are listed for NSN 3110-00-987-6711?

NSN 3110-00-987-6711 has 2 manufacturer part numbers on file: PM207KE9201 (Timken Co Div the Timken Company), 207S (Skf Usa Inc.).

What NSN replaces 3110-00-987-6711?

2 possible matches (shared part number, not a government interchangeability claim): 3460-01-092-8889, 3110-01-168-5660. Verify interchangeability with system specifications before substitution.

What are the specifications of PM207KE9201?

Key specifications for PM207KE9201: Retainer Fabrication Method: PRESSED; Internal Clearance: 0.0090 INCHES NOMINAL AXIAL AND 0.0008 INCHES MINIMUM RADIAL AND 0.0012 INCHES MAXIMUM RADIAL IN; Surface Finish: GROUND; Style Designator: NON-LOADING GROOVE, NON-SEPARABLE. 18 specifications are documented in the U.S. Government catalog.

Is NSN 3110-00-987-6711 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com