The Bearing,ball,annular, cataloged under National Stock Number 3110-00-935-5712, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-00-935-5712 |
| Item Name | Bearing,ball,annular |
| FSC / FSG | 3110 / 31 — Bearings, Antifriction, Unmounted |
| Status | ACTIVE |
| Retainer Fabrication Method | PRESSED |
| Bearing Seal Type | CONTACT |
| Lubrication Material | GREASE |
| Outer Ring Width | 1.1875 INCHES NOMINAL IN |
| Internal Fit-Up Designation | STANDARD |
| Surface Finish | GROUND |
| Style Designator | SINGLE ROW BALL, EXTERNAL SELF-ALIGNING, INNER RING EXTENDED BOTH SIDES, WITH SETSCREW IN INNER RING |
| Overall Outside Diameter | 3.9364 INCHES MINIMUM AND 3.9370 INCHES MAXIMUM IN |
| Bore Shape | STRAIGHT |
| Load Direction | RADIAL |
| Alignment Type | SELF-ALIGNING |
| Seal Quantity | 2 |
| Bore Diameter | 2.0000 INCHES NOMINAL IN |
| Material | STEEL OUTER RING |
| Material | STEEL INNER RING |
| Material | RUBBER SYNTHETIC SEAL |
| Material | STEEL RETAINER |
| Material | STEEL BALL |
| Self-Alignment Location | EXTERNAL |
| Lubrication Material Document and Classification | ARMUAK 781,FSCM 29430 MFR REF SINGLE MATERIAL RESPONSE |
| Inner Ring Width | 2.1825 INCHES MINIMUM AND 2.1875 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| SK30A | 3/9 Design control — primary reference Stephens-Adamson Inc a Sub of Allis-Chalmers Corp |
NSN 3110-00-935-5712 is a Bearing,ball,annular, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.
Key specifications for 3110-00-935-5712: Retainer Fabrication Method: PRESSED; Bearing Seal Type: CONTACT; Lubrication Material: GREASE; Outer Ring Width: 1.1875 INCHES NOMINAL IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.