PartsTable TECHNICAL DATA SHEET
NSN 3110-00-808-2817Government record, cited

Bearing, Ball, Rod End3110-00-808-2817

NSN 3110-00-808-2817 · NIIN 008082817
FSC 3110 — Bearings, Antifriction, Unmounted · FSG 31 — Bearings
Government record, cited
Also searched as  3110-00-808-2817 · 3110008082817 · NIIN 008082817 · 00-808-2817 · FSC 3110 Bearings, Antifriction, Unmounted · GB525K4A · REP4F5FS210
Nearby stock numbers  ·
Features
  • Bearing,ball,rod End — FSC 3110
  • Shank Diameter: 0.4380 INCHES NOMINAL IN
  • Shank Thread Length: 0.7500 INCHES NOMINAL IN
  • Bearing Seal Type: CONTACT
  • Width Across Flats: 0.4380 INCHES NOMINAL IN
  • Lubrication Material: GREASE
  • Outer Ring Width: 0.4380 INCHES NOMINAL IN
  • Style Designator: DOUBLE ROW, STAGGERED, BALL
Identification
  • NSN: 3110-00-808-2817
  • NIIN: 008082817
  • FSC: 3110 — Bearings, Antifriction, Unmounted
  • FSG: 31 — Bearings
General Description

The Bearing,ball,rod End, cataloged under National Stock Number 3110-00-808-2817, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 28 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3110-00-808-2817
Item NameBearing,ball,rod End
FSC / FSG3110 / 31 — Bearings, Antifriction, Unmounted
StatusACTIVE
Shank Diameter0.4380 INCHES NOMINAL IN
Shank Thread Length0.7500 INCHES NOMINAL IN
Bearing Seal TypeCONTACT
Width Across Flats0.4380 INCHES NOMINAL IN
Lubrication MaterialGREASE
Outer Ring Width0.4380 INCHES NOMINAL IN
Style DesignatorDOUBLE ROW, STAGGERED, BALL
Overall Outside Diameter0.9380 INCHES NOMINAL IN
Thread DirectionRIGHT-HAND
Nominal Thread Size0.312 INCHES IN
Self-Alignment Angle10.00 DEGREES NOMINAL
Shank StyleINTERNALLY THREADED W/HEXAGON END
Alignment TypeSELF-ALIGNING
Surface TreatmentCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
Seal Quantity2
Thread Class3B
Thread Quantity Per Inch24
Bore Diameter0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
Length From Bore Center to Shank End1.4690 INCHES NOMINAL IN
MaterialSTEEL OUTER RING
MaterialSTEEL INNER RING
MaterialRUBBER SYNTHETIC SEAL
MaterialSTEEL BALL
MaterialSTEEL SHAFT
Thread Series DesignatorUNF
Self-Alignment LocationINTERNAL
Lubrication Material Document and ClassificationMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
Inner Ring Width0.5930 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
GB525K4A 5/9 Secondary reference
Northrop Grumman Systems Corporation
REP4F5FS210 3/9 Design control — primary reference
Timken Co Div the Timken Company
No interchangeability data on file.
Other items in FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1938
BEARING,BALL,AIRFRAME
3110-00-001-4661
CONE AND ROLLERS,TAPERED ROLLER
3110-00-001-4662
CUP,TAPERED ROLLER BEARING
3110-00-001-4689
BEARING,BALL,ANNULAR
3110-00-001-4722
BEARING,BALL,ANNULAR

Frequently Asked Questions

What is NSN 3110-00-808-2817?

NSN 3110-00-808-2817 is a Bearing,ball,rod End, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.

What are the specifications of 3110-00-808-2817?

Key specifications for 3110-00-808-2817: Shank Diameter: 0.4380 INCHES NOMINAL IN; Shank Thread Length: 0.7500 INCHES NOMINAL IN; Bearing Seal Type: CONTACT; Width Across Flats: 0.4380 INCHES NOMINAL IN. 28 specifications are documented in the U.S. Government catalog.

Is NSN 3110-00-808-2817 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com