The Bearing,ball,rod End, cataloged under National Stock Number 3110-00-799-9145, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. The manufacturer of record is Roller Bearing Company of America, Inc.. Government technical data includes 23 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-00-799-9145 |
| Primary Part Number | REP4H6FS570 |
| Item Name | Bearing,ball,rod End |
| FSC / FSG | 3110 / 31 — Bearings, Antifriction, Unmounted |
| Manufacturer | Roller Bearing Company of America, Inc. |
| Status | ACTIVE |
| Shank Diameter | 0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN |
| Bearing Seal Type | CONTACT |
| Lubrication Material | GREASE |
| Outer Ring Width | 0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM IN |
| Shank Bore Depth | 1.2190 INCHES NOMINAL IN |
| Style Designator | DOUBLE ROW, STAGGERED, BALL |
| Shank Bore Diameter | 0.3860 INCHES NOMINAL IN |
| Overall Outside Diameter | 0.9280 INCHES MINIMUM AND 0.9480 INCHES MAXIMUM IN |
| Self-Alignment Angle | 10.00 DEGREES NOMINAL |
| Shank Style | HOLLOW |
| Alignment Type | SELF-ALIGNING |
| Surface Treatment | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| Seal Quantity | 2 |
| Bore Diameter | 0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN |
| Length From Bore Center to Shank End | 1.8650 INCHES MINIMUM AND 1.8850 INCHES MAXIMUM IN |
| Material | STEEL OUTER RING |
| Material | STEEL INNER RING |
| Material | RUBBER SYNTHETIC SEAL |
| Material | STEEL BALL |
| Material | STEEL SHAFT |
| Self-Alignment Location | INTERNAL |
| Lubrication Material Document and Classification | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| Inner Ring Width | 0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| REP4H6FS570 PRIMARY | Roller Bearing Company of America, Inc. (USA) |
| Reference | Meaning |
|---|---|
| GB525J4BF | 7/2 Vendor item drawing reference Northrop Grumman Systems Corporation |
| REP4H6FS570 | 5/9 Secondary reference Timken Co Div the Timken Company |
| REP4H6FS243 | 5/9 Secondary reference Timken Co Div the Timken Company |
NSN 3110-00-799-9145 is a Bearing,ball,rod End, manufactured by Roller Bearing Company of America, Inc., classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.
NSN 3110-00-799-9145 has 1 manufacturer part number on file: REP4H6FS570 (Roller Bearing Company of America, Inc.).
Key specifications for REP4H6FS570: Shank Diameter: 0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN; Bearing Seal Type: CONTACT; Lubrication Material: GREASE; Outer Ring Width: 0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM IN. 23 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.