PartsTable TECHNICAL DATA SHEET
NSN 3110-00-796-2720Government record, cited

Bearing, Roller, Rod End3110-00-796-2720

NSN 3110-00-796-2720 · NIIN 007962720 · Part number 134HM10028-1
Northrop Grumman Systems Corporation · FSC 3110 — Bearings, Antifriction, Unmounted · FSG 31 — Bearings · CAGE 26512
Government record, cited
NSN 3110-00-796-2720 — this item is cataloged by the U.S. Government under National Stock Number 3110-00-796-2720. Manufacturer of record part number: 134HM10028-1.
Also searched as  3110-00-796-2720 · 3110007962720 · NIIN 007962720 · 00-796-2720 · FSC 3110 Bearings, Antifriction, Unmounted · CAGE 26512 · 134HM10028-1
Nearby stock numbers  ·
Features
  • Bearing,roller,rod End — FSC 3110
  • Shank Diameter: 1.1136 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM IN
  • Shank Thread Length: 3.0520 INCHES MINIMUM AND 3.0720 INCHES MAXIMUM IN
  • Lubrication Material: GREASE
  • Outer Ring Width: 0.7810 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING
  • Surface Treatment Document and Classification: GSS8050A,26512 MFR REF SINGLE TREATMENT RESPONSE ROD END BODY
  • Surface Treatment Document and Classification: QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ALIGNMENT RING
Identification
  • NSN: 3110-00-796-2720
  • NIIN: 007962720
  • FSC: 3110 — Bearings, Antifriction, Unmounted
  • FSG: 31 — Bearings
  • Primary part number: 134HM10028-1
  • Manufacturer: Northrop Grumman Systems Corporation
General Description

The Bearing,roller,rod End, cataloged under National Stock Number 3110-00-796-2720, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. The manufacturer of record is Northrop Grumman Systems Corporation. Government technical data includes 28 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3110-00-796-2720
Primary Part Number134HM10028-1
Item NameBearing,roller,rod End
FSC / FSG3110 / 31 — Bearings, Antifriction, Unmounted
ManufacturerNorthrop Grumman Systems Corporation
StatusACTIVE
Shank Diameter1.1136 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM IN
Shank Thread Length3.0520 INCHES MINIMUM AND 3.0720 INCHES MAXIMUM IN
Lubrication MaterialGREASE
Outer Ring Width0.7810 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING
Surface Treatment Document and ClassificationGSS8050A,26512 MFR REF SINGLE TREATMENT RESPONSE ROD END BODY
Surface Treatment Document and ClassificationQQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ALIGNMENT RING
Surface Treatment Document and ClassificationQQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE INNER RING
Surface Treatment Document and ClassificationQQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROLLER
Style DesignatorNEEDLE ROLLER
Material Document and ClassificationMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY
Material Document and ClassificationAMS6440,81346 MFR REF SINGLE MATERIAL RESPONSE ALIGNMENT RING
Material Document and ClassificationAMS6440,81346 MFR REF SINGLE MATERIAL RESPONSE INNER RING
Material Document and ClassificationAMS6440,81346 MFR REF SINGLE MATERIAL RESPONSE OUTER RING
Material Document and ClassificationAMS6440,81346 MFR REF SINGLE MATERIAL RESPONSE ROLLER
Overall Outside Diameter2.1660 INCHES MINIMUM AND 2.2060 INCHES MAXIMUM IN
Features ProvidedALIGNING RING
Thread DirectionRIGHT-HAND
Nominal Thread Size1.125 INCHES IN
Shank StyleEXTERNALLY THREADED W/SLOT
Alignment TypeSELF-ALIGNING
Surface TreatmentCADMIUM ROD END BODY
Surface TreatmentCADMIUM OUTER RING
Surface TreatmentCADMIUM INNER RING
Surface TreatmentCADMIUM ALIGNMENT RING
Surface TreatmentCADMIUM ROLLER
Thread Class3A A
Test Data Document81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
134HM10028-1 PRIMARY Northrop Grumman Systems Corporation (USA)
No interchangeability data on file.
Other items in FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1938
BEARING,BALL,AIRFRAME
3110-00-001-4661
CONE AND ROLLERS,TAPERED ROLLER
3110-00-001-4662
CUP,TAPERED ROLLER BEARING
3110-00-001-4689
BEARING,BALL,ANNULAR
3110-00-001-4722
BEARING,BALL,ANNULAR

Frequently Asked Questions

What is NSN 3110-00-796-2720?

NSN 3110-00-796-2720 is a Bearing,roller,rod End, manufactured by Northrop Grumman Systems Corporation, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.

What part numbers are listed for NSN 3110-00-796-2720?

NSN 3110-00-796-2720 has 1 manufacturer part number on file: 134HM10028-1 (Northrop Grumman Systems Corporation).

What are the specifications of 134HM10028-1?

Key specifications for 134HM10028-1: Shank Diameter: 1.1136 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM IN; Shank Thread Length: 3.0520 INCHES MINIMUM AND 3.0720 INCHES MAXIMUM IN; Lubrication Material: GREASE; Outer Ring Width: 0.7810 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM IN. 28 specifications are documented in the U.S. Government catalog.

Is NSN 3110-00-796-2720 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com