The Bearing,ball,thrust, cataloged under National Stock Number 3110-00-435-0451, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. The manufacturer of record is General Motors Llc Dba General Motors Llc. Government technical data includes 11 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-00-435-0451 |
| Primary Part Number | 907963 |
| Item Name | Bearing,ball,thrust |
| FSC / FSG | 3110 / 31 — Bearings, Antifriction, Unmounted |
| Manufacturer | General Motors Llc Dba General Motors Llc |
| Status | ACTIVE |
| Flange Outside Diameter | 2.0720 INCHES MINIMUM AND 2.0870 INCHES MAXIMUM IN |
| Surface Finish | GROUND |
| Groove Diameter | 1.6200 INCHES MINIMUM AND 1.6300 INCHES MAXIMUM IN |
| Style Designator | CLUTCH RELEASE, INTEGRAL INNER RING W/FORK GROOVE, SLIDER TYPE |
| Thrust Directional Capability Designation | SINGLE |
| Effective Length | 0.4750 INCHES NOMINAL IN |
| Overall Outside Diameter | 2.7980 INCHES MINIMUM AND 2.8280 INCHES MAXIMUM IN |
| Alignment Type | RIGID |
| Bore Diameter | 1.3750 INCHES MINIMUM AND 1.3770 INCHES MAXIMUM IN |
| Material | STEEL OVERALL |
| Groove Width | 0.4750 INCHES MINIMUM AND 0.4830 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 907963 | General Motors Llc Dba General Motors Llc (USA) |
| Reference | Meaning |
|---|---|
| 907963 | 5/9 Secondary reference General Motors Corp Chevrolet Motor Div Special Products Dept |
| CT24KX1LD | 5/9 Secondary reference General Motors Corp Delco Moraine Ndh Div |
| 907963 | 3/9 Design control — primary reference General Motors Corp Delco Moraine Ndh Div |
| 908093 | 5/9 Secondary reference General Motors Corp Chevrolet Motor Div Special Products Dept |
| CT24KX1RV | 5/9 Secondary reference General Motors Corp Delco Moraine Ndh Div |
| 908093 | 5/9 Secondary reference General Motors Llc Dba General Motors Llc |
NSN 3110-00-435-0451 is a Bearing,ball,thrust, manufactured by General Motors Llc Dba General Motors Llc, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.
NSN 3110-00-435-0451 has 1 manufacturer part number on file: 907963 (General Motors Llc Dba General Motors Llc).
Key specifications for 907963: Flange Outside Diameter: 2.0720 INCHES MINIMUM AND 2.0870 INCHES MAXIMUM IN; Surface Finish: GROUND; Groove Diameter: 1.6200 INCHES MINIMUM AND 1.6300 INCHES MAXIMUM IN; Style Designator: CLUTCH RELEASE, INTEGRAL INNER RING W/FORK GROOVE, SLIDER TYPE. 11 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.