The Bearing,ball,rod End, cataloged under National Stock Number 3110-00-434-4653, is classified within Federal Supply Class 3110 (No Item Name Available) of the Bearings group. The primary manufacturer of record is Sae International Dba Sae International. Government technical data includes 29 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 9 commercial cross-references from 6 manufacturers, enabling identification through both NSN and commercial part number lookups. 4 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-00-434-4653 |
| Primary Part Number | MS21152-1 |
| Item Name | Bearing,ball,rod End |
| FSC / FSG | 3110 / 31 — No Item Name Available |
| Manufacturer | Sae International Dba Sae International |
| Status | ACTIVE |
| Shank Style | HOLLOW |
| Shank Bore Depth | 0.8440 INCHES MINIMUM AND 0.9060 INCHES MAXIMUM IN |
| Self-Alignment Location | INTERNAL |
| Bearing Seal Type | CONTACT |
| Inner Ring Width | 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN |
| Alignment Type | SELF-ALIGNING |
| Shank Bore Diameter | 0.2620 INCHES MINIMUM AND 0.2820 INCHES MAXIMUM IN |
| Outer Ring Width | 0.3180 INCHES MINIMUM AND 0.3380 INCHES MAXIMUM IN |
| Self-Alignment Angle | 10.00 DEGREES NOMINAL |
| Seal Quantity | 2 |
| Length From Bore Center to Shank End | 1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM IN |
| Lubrication Material | GREASE |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| Material | STEEL COMP 4130 OUTER RING |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY |
| Material | PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| Material Document and Classification | AMS 3652 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 3666 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
| Lubrication Material Document and Classification | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| Material Document and Classification | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE SHAFT |
| Overall Outside Diameter | 0.7710 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM IN |
| Style Designator | DOUBLE ROW, STAGGERED, BALL |
| Material Document and Classification | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| Surface Treatment | CADMIUM ROD END BODY |
| Material | STEEL COMP E52100 BALL |
| Material | STEEL COMP E52100 INNER RING |
| Shank Diameter | 0.4280 INCHES MINIMUM AND 0.4300 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OUTER RING |
| Material Document and Classification | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| Bore Diameter | 0.1897 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| REP3H4-1F | Roller Bearing Company of America, Inc. (USA) |
| REP3H5FS464 | Roller Bearing Company of America, Inc. (USA) |
| REP3H5FS464 | Timken Co Div the Timken Company (USA) |
| REP3H5 | Skf Usa Inc. (USA) |
| MS21152-1 | Society of Automotive Engineers Inc (USA) |
| MS21152-1 | Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M |
| MS21152-1 PRIMARY | Sae International Dba Sae International (USA) |
| AS21152 | Society of Automotive Engineers Inc (USA) |
| AS21152 | Sae International Dba Sae International (USA) |
NSN 3110-00-434-4653 is a Bearing,ball,rod End, manufactured by Sae International Dba Sae International, classified under FSC 3110 (No Item Name Available). Status: active.
NSN 3110-00-434-4653 has 9 cross-referenced part numbers: REP3H4-1F (Roller Bearing Company of America, Inc.), REP3H5FS464 (Roller Bearing Company of America, Inc.), REP3H5FS464 (Timken Co Div the Timken Company), REP3H5 (Skf Usa Inc.), MS21152-1 (Society of Automotive Engineers Inc) and 4 more.
There are 4 known substitutes for 3110-00-434-4653: 3110-00-187-5666, 3110-00-227-4724, 3110-00-723-2418 and 1 more. Verify interchangeability with system specifications before substitution.
Key specifications for MS21152-1: Shank Style: HOLLOW; Shank Bore Depth: 0.8440 INCHES MINIMUM AND 0.9060 INCHES MAXIMUM IN; Self-Alignment Location: INTERNAL; Bearing Seal Type: CONTACT. 30 total characteristics are documented in the Federal Logistics Information System.