The Bearing,ball,annular, cataloged under National Stock Number 3110-00-322-0065, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-00-322-0065 |
| Item Name | Bearing,ball,annular |
| FSC / FSG | 3110 / 31 — Bearings, Antifriction, Unmounted |
| Status | ACTIVE |
| Retainer Fabrication Method | PRESSED |
| Lubrication Material | GREASE |
| Outer Ring Width | 0.1960 INCHES NOMINAL IN |
| Internal Clearance | 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN |
| Flange Outside Diameter | 0.5650 INCHES NOMINAL IN |
| Surface Finish | GROUND |
| Shield Quantity | 2 |
| Style Designator | NON-LOADING GROOVE, NON-SEPARABLE |
| Material Document and Classification | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| Bore Shape | STRAIGHT |
| Load Direction | RADIAL |
| Flange Width | 0.0420 INCHES NOMINAL IN |
| Outer Ring Outside Diameter | 0.5000 INCHES NOMINAL IN |
| Standard Tolerance Designation | ABEC NO.7 |
| Bore Diameter | 0.1875 INCHES NOMINAL IN |
| Material | STEEL COMP 440C OVERALL |
| Lubrication Material Document and Classification | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| Inner Ring Width | 0.2272 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| SFR3PPEEK25-235 | 5/2 Secondary reference U.S. Government activity |
| SFR3PPEEK25-168 | 3/2 Design control — primary reference U.S. Government activity |
NSN 3110-00-322-0065 is a Bearing,ball,annular, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.
Key specifications for 3110-00-322-0065: Retainer Fabrication Method: PRESSED; Lubrication Material: GREASE; Outer Ring Width: 0.1960 INCHES NOMINAL IN; Internal Clearance: 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.