The Bearing,ball,rod End, cataloged under National Stock Number 3110-00-293-9105, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 28 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-00-293-9105 |
| Item Name | Bearing,ball,rod End |
| FSC / FSG | 3110 / 31 — Bearings, Antifriction, Unmounted |
| Status | ACTIVE |
| Shank Diameter | 0.4375 INCHES NOMINAL IN |
| Shank Thread Length | 0.7500 INCHES NOMINAL IN |
| Bearing Seal Type | CONTACT |
| Width Across Flats | 0.4375 INCHES NOMINAL IN |
| Lubrication Material | GREASE |
| Outer Ring Width | 0.4375 INCHES NOMINAL IN |
| Style Designator | DOUBLE ROW, STAGGERED, BALL |
| Overall Outside Diameter | 0.9375 INCHES NOMINAL IN |
| Thread Direction | LEFT-HAND |
| Nominal Thread Size | 0.312 INCHES IN |
| Self-Alignment Angle | 10.00 DEGREES NOMINAL |
| Shank Style | INTERNALLY THREADED W/HEXAGON END |
| Alignment Type | SELF-ALIGNING |
| Surface Treatment | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| Seal Quantity | 2 |
| Thread Class | 3B |
| Thread Quantity Per Inch | 24 |
| Bore Diameter | 0.2500 INCHES NOMINAL IN |
| Length From Bore Center to Shank End | 1.4688 INCHES NOMINAL IN |
| Material | STEEL OUTER RING |
| Material | STEEL INNER RING |
| Material | RUBBER SYNTHETIC SEAL |
| Material | STEEL BALL |
| Material | STEEL SHAFT |
| Thread Series Designator | UNF |
| Self-Alignment Location | INTERNAL |
| Lubrication Material Document and Classification | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| Inner Ring Width | 0.5930 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| RE4FL5-2 | 5/9 Secondary reference Timken Co Div the Timken Company |
| RE4FL5-2FS160 | 3/9 Design control — primary reference Timken Co Div the Timken Company |
| RE4FL5-2MILG3278 | 5/9 Secondary reference Timken Co Div the Timken Company |
NSN 3110-00-293-9105 is a Bearing,ball,rod End, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.
Key specifications for 3110-00-293-9105: Shank Diameter: 0.4375 INCHES NOMINAL IN; Shank Thread Length: 0.7500 INCHES NOMINAL IN; Bearing Seal Type: CONTACT; Width Across Flats: 0.4375 INCHES NOMINAL IN. 28 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.