PartsTable TECHNICAL DATA SHEET
NSN 3110-00-273-4029Government record, cited

Cam Follower, Needle Bearing3110-00-273-4029

NSN 3110-00-273-4029 · NIIN 002734029 · Part number CDTT45842
Rbc Aircraft Products, Inc. · FSC 3110 — Bearings, Antifriction, Unmounted · FSG 31 — Bearings · CAGE 3NPS1
Government record, cited
NSN 3110-00-273-4029 — this item is cataloged by the U.S. Government under National Stock Number 3110-00-273-4029. Manufacturer of record part number: CDTT45842.
Also searched as  3110-00-273-4029 · 3110002734029 · NIIN 002734029 · 00-273-4029 · FSC 3110 Bearings, Antifriction, Unmounted · CAGE 3NPS1 · CDTT45842 · GB523P5 · HRS3CF8TT2R
Nearby stock numbers  ·
Features
  • Cam Follower,needle Bearing — FSC 3110
  • Bearing Seal Type: CONTACT
  • Lubrication Material: GREASE
  • Outer Ring Width: 0.3435 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-C-320,CLASS 2 FED SPEC 1ST TREATMENT RESPONSE OUTER RING
  • Surface Treatment Document and Classification: QQ-P-416,TYPE 1,CLASS 2 FED SPEC 2ND TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED
  • Thread Length: 0.3590 INCHES NOMINAL IN
  • Style Designator: CAM FOLLOWER
Identification
  • NSN: 3110-00-273-4029
  • NIIN: 002734029
  • FSC: 3110 — Bearings, Antifriction, Unmounted
  • FSG: 31 — Bearings
  • Primary part number: CDTT45842
  • Manufacturer: Rbc Aircraft Products, Inc.
General Description

The Cam Follower,needle Bearing, cataloged under National Stock Number 3110-00-273-4029, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. The manufacturer of record is Rbc Aircraft Products, Inc.. Government technical data includes 26 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3110-00-273-4029
Primary Part NumberCDTT45842
Item NameCam Follower,needle Bearing
FSC / FSG3110 / 31 — Bearings, Antifriction, Unmounted
ManufacturerRbc Aircraft Products, Inc.
StatusACTIVE
Bearing Seal TypeCONTACT
Lubrication MaterialGREASE
Outer Ring Width0.3435 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-C-320,CLASS 2 FED SPEC 1ST TREATMENT RESPONSE OUTER RING
Surface Treatment Document and ClassificationQQ-P-416,TYPE 1,CLASS 2 FED SPEC 2ND TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED
Thread Length0.3590 INCHES NOMINAL IN
Style DesignatorCAM FOLLOWER
Overall Outside Diameter0.7495 INCHES MINIMUM AND 0.7510 INCHES MAXIMUM IN
Thread DirectionRIGHT-HAND
Nominal Thread Size0.312 INCHES IN
Specification/standard Data26512-GB523P MANUFACTURERS SPECIFICATION
Stud Length0.8590 INCHES MINIMUM AND 0.9060 INCHES MAXIMUM IN
Surface TreatmentCHROMIUM OUTER RING
Surface TreatmentCADMIUM EXPOSED SURFACES AS MOUNTED
Seal Quantity2
Thread Class3A A
Test Data Document81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Thread Quantity Per Inch24
MaterialSTEEL COMP E52100 OUTER RING
MaterialSTEEL COMP E52100 STUD
MaterialPLASTIC POLYAMIDE NYLON OR PLASTIC POLYTETRAFLUOROETHYLENE AND GLASS SEAL
MaterialSTEEL COMP 1117 WASHER
MaterialSTEEL COMP E52100 OR STEEL COMP E50100 ROLLER
Thread Series DesignatorUNF
Lubrication Material Document and ClassificationMIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
Stud Diameter0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
CDTT45842 PRIMARY Rbc Aircraft Products, Inc. (USA)
Reference documents
ReferenceMeaning
GB523P5 7/2 Vendor item drawing reference
Northrop Grumman Systems Corporation
CDTT45842 5/9 Secondary reference
Timken Aerospace, Inc Dba Torrington Product
HRS3CF8TT2R 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1938
BEARING,BALL,AIRFRAME
3110-00-001-4661
CONE AND ROLLERS,TAPERED ROLLER
3110-00-001-4662
CUP,TAPERED ROLLER BEARING
3110-00-001-4689
BEARING,BALL,ANNULAR
3110-00-001-4722
BEARING,BALL,ANNULAR

Frequently Asked Questions

What is NSN 3110-00-273-4029?

NSN 3110-00-273-4029 is a Cam Follower,needle Bearing, manufactured by Rbc Aircraft Products, Inc., classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.

What part numbers are listed for NSN 3110-00-273-4029?

NSN 3110-00-273-4029 has 1 manufacturer part number on file: CDTT45842 (Rbc Aircraft Products, Inc.).

What are the specifications of CDTT45842?

Key specifications for CDTT45842: Bearing Seal Type: CONTACT; Lubrication Material: GREASE; Outer Ring Width: 0.3435 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-C-320,CLASS 2 FED SPEC 1ST TREATMENT RESPONSE OUTER RING. 26 specifications are documented in the U.S. Government catalog.

Is NSN 3110-00-273-4029 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com