The Bearing,ball,rod End, cataloged under National Stock Number 3110-00-232-3177, is classified within Federal Supply Class 3110 (No Item Name Available) of the Bearings group. The primary manufacturer of record is Sae International Dba Sae International. Government technical data includes 29 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 10 commercial cross-references from 8 manufacturers, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-00-232-3177 |
| Primary Part Number | MS21151-9 |
| Item Name | Bearing,ball,rod End |
| FSC / FSG | 3110 / 31 — No Item Name Available |
| Manufacturer | Sae International Dba Sae International |
| Status | ACTIVE |
| Thread Class | 3A A |
| Overall Outside Diameter | 0.9280 INCHES MINIMUM AND 0.9480 INCHES MAXIMUM IN |
| Seal Quantity | 2 |
| Length From Bore Center to Shank End | 1.8650 INCHES MINIMUM AND 1.8850 INCHES MAXIMUM IN |
| Alignment Type | SELF-ALIGNING |
| Thread Quantity Per Inch | 24 |
| Outer Ring Width | 0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM IN |
| Bearing Seal Type | CONTACT |
| Nominal Thread Size | 0.375 INCHES IN |
| Self-Alignment Location | INTERNAL |
| Shank Thread Length | 1.0940 INCHES MINIMUM AND 1.1560 INCHES MAXIMUM IN |
| Lubrication Material | GREASE |
| Self-Alignment Angle | 10.00 DEGREES NOMINAL |
| Inner Ring Width | 0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM IN |
| Style Designator | DOUBLE ROW, STAGGERED, BALL |
| Material Document and Classification | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| Material Document and Classification | AMS3652 ASSN STD SINGLE MATERIAL RESPONSE OR AMS3666 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
| Thread Direction | LEFT-HAND |
| Bore Diameter | 0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM ROD END BODY |
| Material | PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Surface Treatment Document and Classification | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| Material | STEEL COMP E52100 BALL |
| Material | STEEL COMP 4130 OUTER RING |
| Material Document and Classification | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| Material Document and Classification | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| Material Document and Classification | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL |
| Surface Treatment | CADMIUM OUTER RING |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MS21151-9 PRIMARY | Sae International Dba Sae International (USA) |
| AS21151 | Society of Automotive Engineers Inc (USA) |
| 3110002323177 | E.c.a Etablissement Centrald'approvisionnement Des Forces Armee |
| REP4ML6 | Skf Usa Inc. (USA) |
| MS21151-9 | Society of Automotive Engineers Inc (USA) |
| REP4ML6FS464 | Timken Co Div the Timken Company (USA) |
| MS21151-9 | Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M |
| 3110002323177 | E.c.a Etablissement Central Des Approvisionnements Des Forces Armees Royales |
| REP4ML6-8F | Roller Bearing Company of America, Inc. (USA) |
| AS21151 | Sae International Dba Sae International (USA) |
NSN 3110-00-232-3177 is a Bearing,ball,rod End, manufactured by Sae International Dba Sae International, classified under FSC 3110 (No Item Name Available). Status: active.
NSN 3110-00-232-3177 has 10 cross-referenced part numbers: MS21151-9 (Sae International Dba Sae International), AS21151 (Society of Automotive Engineers Inc), 3110002323177 (E.c.a Etablissement Centrald'approvisionnement Des Forces Armee), REP4ML6 (Skf Usa Inc.), MS21151-9 (Society of Automotive Engineers Inc) and 5 more.
There are 12 known substitutes for 3110-00-232-3177: 3110-00-001-4707, 3110-00-159-1632, 3110-00-232-2933 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for MS21151-9: Thread Class: 3A A; Overall Outside Diameter: 0.9280 INCHES MINIMUM AND 0.9480 INCHES MAXIMUM IN; Seal Quantity: 2; Length From Bore Center to Shank End: 1.8650 INCHES MINIMUM AND 1.8850 INCHES MAXIMUM IN. 30 total characteristics are documented in the Federal Logistics Information System.