PartsTable TECHNICAL DATA SHEET
NSN 3110-00-193-0632Government record, cited

Bearing, Ball, Annular3110-00-193-0632

NSN 3110-00-193-0632 · NIIN 001930632 · Part number 21225
Industrial Technologies and Services Llc · FSC 3110 — Bearings, Antifriction, Unmounted · FSG 31 — Bearings · CAGE 76122
Government record, cited
NSN 3110-00-193-0632 — this item is cataloged by the U.S. Government under National Stock Number 3110-00-193-0632. Manufacturer of record part number: 21225.
Also searched as  3110-00-193-0632 · 3110001930632 · NIIN 001930632 · 00-193-0632 · FSC 3110 Bearings, Antifriction, Unmounted · CAGE 76122 · 21225 · 88604X1Z · FF-B-171
Nearby stock numbers  ·
Features
  • Bearing,ball,annular — FSC 3110
  • Retainer Fabrication Method: PRESSED
  • Bearing Seal Type: CONTACT
  • Lubrication Material: GREASE
  • Outer Ring Width: 0.5910 INCHES NOMINAL IN
  • Internal Fit-Up Designation: STANDARD
  • Surface Finish: GROUND
  • Style Designator: LOADING GROOVE, NON-SEPARABLE
Identification
  • NSN: 3110-00-193-0632
  • NIIN: 001930632
  • FSC: 3110 — Bearings, Antifriction, Unmounted
  • FSG: 31 — Bearings
  • Primary part number: 21225
  • Manufacturer: Industrial Technologies and Services Llc
General Description

The Bearing,ball,annular, cataloged under National Stock Number 3110-00-193-0632, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. The manufacturer of record is Industrial Technologies and Services Llc. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 3 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3110-00-193-0632
Primary Part Number21225
Item NameBearing,ball,annular
FSC / FSG3110 / 31 — Bearings, Antifriction, Unmounted
ManufacturerIndustrial Technologies and Services Llc
StatusACTIVE
Retainer Fabrication MethodPRESSED
Bearing Seal TypeCONTACT
Lubrication MaterialGREASE
Outer Ring Width0.5910 INCHES NOMINAL IN
Internal Fit-Up DesignationSTANDARD
Surface FinishGROUND
Style DesignatorLOADING GROOVE, NON-SEPARABLE
Overall Outside Diameter52.00 MILLIMETERS NOMINAL MM
Bore ShapeSTRAIGHT
Nondefinitive Spec/std Data117CL2GR00 TYPE
Load DirectionRADIAL
Seal Quantity2
Standard Tolerance DesignationABEC NO.1
Bore Diameter20.00 MILLIMETERS NOMINAL MM
MaterialSTEEL OUTER RING
MaterialSTEEL INNER RING
MaterialRUBBER SYNTHETIC SEAL
MaterialSTEEL RETAINER
MaterialSTEEL BALL
Lubrication Material Document and ClassificationALVANIA 3,FSCM 54527 MFR REF SINGLE MATERIAL RESPONSE
Inner Ring Width23.00 MILLIMETERS NOMINAL MM
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 3
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5940-00-258-5723SCB18903 POSSIBLE MATCH
TERMINAL BOARD
Possible match (shared part number)Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir
3020-01-110-63722122508 POSSIBLE MATCH
GEAR,SPUR
Possible match (shared part number)Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier
1650-01-219-095521225 POSSIBLE MATCH
SHAFT AND BEARING ASSEMBLY
Possible match (shared part number)Parker Hannifin Corporation Div Hydraulic Systems Division
Cross-Reference Index
Part NumberManufacturer
21225 Industrial Technologies and Services Llc (USA)
Reference documents
ReferenceMeaning
88604X1Z 3/9 Design control — primary reference
General Motors Corp Delco Moraine Ndh Div
FF-B-171 4/1 Identification reference
U.S. Government activity
Related Parts
5940-00-258-5723POSSIBLE MATCH
TERMINAL BOARD
SCB18903
3020-01-110-6372POSSIBLE MATCH
GEAR,SPUR
2122508
1650-01-219-0955POSSIBLE MATCH
SHAFT AND BEARING ASSEMBLY
21225

Frequently Asked Questions

What is NSN 3110-00-193-0632?

NSN 3110-00-193-0632 is a Bearing,ball,annular, manufactured by Industrial Technologies and Services Llc, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.

What part numbers are listed for NSN 3110-00-193-0632?

NSN 3110-00-193-0632 has 1 manufacturer part number on file: 21225 (Industrial Technologies and Services Llc).

What NSN replaces 3110-00-193-0632?

3 possible matches (shared part number, not a government interchangeability claim): 5940-00-258-5723, 3020-01-110-6372, 1650-01-219-0955. Verify interchangeability with system specifications before substitution.

What are the specifications of 21225?

Key specifications for 21225: Retainer Fabrication Method: PRESSED; Bearing Seal Type: CONTACT; Lubrication Material: GREASE; Outer Ring Width: 0.5910 INCHES NOMINAL IN. 21 specifications are documented in the U.S. Government catalog.

Is NSN 3110-00-193-0632 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com