The Bearing,ball,airframe, cataloged under National Stock Number 3110-00-186-3098, is classified within Federal Supply Class 3110 (No Item Name Available) of the Bearings group. The primary manufacturer of record is Timken Co Div the Timken Company. Government technical data includes 23 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 5 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-00-186-3098 |
| Primary Part Number | K659458-23 |
| Item Name | Bearing,ball,airframe |
| FSC / FSG | 3110 / 31 — No Item Name Available |
| Manufacturer | Timken Co Div the Timken Company |
| Status | ACTIVE |
| Bore Diameter | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN |
| Seal Quantity | 2 |
| Lubrication Material Document and Classification | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| Inner Ring Width | 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN |
| Seal Quantity | 2 |
| Load Direction | RADIAL |
| Standard Tolerance Designation | AFBMA STD TOLERANCE FOR AIRFRAME NEEDLE BEARINGS |
| Retainer Fabrication Method | PRESSED |
| Bearing Seal Type | CONTACT |
| Outer Ring Width | 0.4330 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN |
| Load Direction | RADIAL |
| Style Designator | SINGLE ROW INNER RING EXTENDED BOTH SIDES |
| Bearing Seal Type | CONTACT |
| Material | STEEL COMP E52100 OUTER RING |
| Overall Outside Diameter | 1.9995 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM IN |
| Standard Tolerance Designation | AFBMA STD TOLERANCE FOR AIRFRAME NEEDLE BEARINGS |
| Lubrication Material Document and Classification | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| Material | STEEL COMP E52100 BALL |
| Material | STEEL COMP E52100 INNER RING |
| Material | STEEL RETAINER |
| Style Designator | SINGLE ROW INNER RING EXTENDED BOTH SIDES |
| Material | RUBBER SYNTHETIC SEAL |
| Material | STEEL COMP E52100 INNER RING |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| K659458-23 PRIMARY | Timken Co Div the Timken Company (USA) |
| K659458-23 | Kaman Aerospace Corporation Dba Air Vehicles & Mro Division (USA) |
| KP16A-FS464 | Timken Co Div the Timken Company (USA) |
| 3110PL0138821 | Jednolity Indeks Materialowy - Uniform Material Index (POL) |
| KP16AE8454 | Timken Co Div the Timken Company (USA) |
NSN 3110-00-186-3098 is a Bearing,ball,airframe, manufactured by Timken Co Div the Timken Company, classified under FSC 3110 (No Item Name Available). Status: active.
NSN 3110-00-186-3098 has 5 cross-referenced part numbers: K659458-23 (Timken Co Div the Timken Company), K659458-23 (Kaman Aerospace Corporation Dba Air Vehicles & Mro Division), KP16A-FS464 (Timken Co Div the Timken Company), 3110PL0138821 (Jednolity Indeks Materialowy - Uniform Material Index), KP16AE8454 (Timken Co Div the Timken Company).
There is 1 known substitute for 3110-00-186-3098: 3110-00-027-8142. Verify interchangeability with system specifications before substitution.
Key specifications for K659458-23: Bore Diameter: 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN; Seal Quantity: 2; Lubrication Material Document and Classification: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE; Inner Ring Width: 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN. 23 total characteristics are documented in the Federal Logistics Information System.