PartsTable TECHNICAL DATA SHEET
NSN 3110-00-182-8278Government record, cited

Bearing, Ball, Annular3110-00-182-8278

NSN 3110-00-182-8278 · NIIN 001828278
FSC 3110 — Bearings, Antifriction, Unmounted · FSG 31 — Bearings
Government record, cited
Also searched as  3110-00-182-8278 · 3110001828278 · NIIN 001828278 · 00-182-8278 · FSC 3110 Bearings, Antifriction, Unmounted · BR907194 · 5393-21 · 907194
Nearby stock numbers  ·
Features
  • Bearing,ball,annular — FSC 3110
  • Lubrication Material: GREASE
  • Outer Ring Width: 1.3050 INCHES MINIMUM AND 1.3150 INCHES MAXIMUM IN
  • Internal Clearance: 0.0006 INCHES MINIMUM RADIAL AND 0.0010 INCHES MAXIMUM RADIAL IN
  • Surface Finish: GROUND
  • Shield Quantity: 2
  • Overall Outside Diameter: 2.2930 INCHES MINIMUM AND 2.3000 INCHES MAXIMUM IN
  • Bore Shape: STRAIGHT
Identification
  • NSN: 3110-00-182-8278
  • NIIN: 001828278
  • FSC: 3110 — Bearings, Antifriction, Unmounted
  • FSG: 31 — Bearings
General Description

The Bearing,ball,annular, cataloged under National Stock Number 3110-00-182-8278, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 3 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3110-00-182-8278
Item NameBearing,ball,annular
FSC / FSG3110 / 31 — Bearings, Antifriction, Unmounted
StatusACTIVE
Lubrication MaterialGREASE
Outer Ring Width1.3050 INCHES MINIMUM AND 1.3150 INCHES MAXIMUM IN
Internal Clearance0.0006 INCHES MINIMUM RADIAL AND 0.0010 INCHES MAXIMUM RADIAL IN
Surface FinishGROUND
Shield Quantity2
Overall Outside Diameter2.2930 INCHES MINIMUM AND 2.3000 INCHES MAXIMUM IN
Bore ShapeSTRAIGHT
Contact Angle25.0 DEGREES NOMINAL
Load DirectionANGULAR
Internal Fit-Up Contact Angular DirectionOUTWARD CONVERGENT
Bore Diameter0.7498 INCHES MINIMUM AND 0.7503 INCHES MAXIMUM IN
MaterialSTEEL OVERALL
Lubrication Material Document and ClassificationALVANIA 3,FSCM 54527 MFR REF SINGLE MATERIAL RESPONSE
Inner Ring Width1.3600 INCHES MINIMUM AND 1.3700 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 3
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5310-01-270-6178 POSSIBLE MATCH
WASHER,FLAT
Possible match (shared part number)
3040-01-288-6818907194-1 POSSIBLE MATCH
CAM,CONTROL
Possible match (shared part number)Lockheed Martin Corp
5310-01-313-585290719-4 POSSIBLE MATCH
WASHER,FLAT
Possible match (shared part number)Circor Instrumentation Technologies, Inc. Dba Hoke Gyrolok
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
BR907194 5/9 Secondary reference
Lift Parts Mfg Co Inc Div of Echlin Mfg Co the
5393-21 3/9 Design control — primary reference
Landoll Corporation Dba Landoll Corporation Drexel Division Div Drexel
907194 5/9 Secondary reference
General Motors Corp Delco Moraine Ndh Div
Related Parts
5310-01-270-6178POSSIBLE MATCH
WASHER,FLAT
3040-01-288-6818POSSIBLE MATCH
CAM,CONTROL
907194-1
5310-01-313-5852POSSIBLE MATCH
WASHER,FLAT
90719-4

Frequently Asked Questions

What is NSN 3110-00-182-8278?

NSN 3110-00-182-8278 is a Bearing,ball,annular, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.

What NSN replaces 3110-00-182-8278?

3 possible matches (shared part number, not a government interchangeability claim): 5310-01-270-6178, 3040-01-288-6818, 5310-01-313-5852. Verify interchangeability with system specifications before substitution.

What are the specifications of 3110-00-182-8278?

Key specifications for 3110-00-182-8278: Lubrication Material: GREASE; Outer Ring Width: 1.3050 INCHES MINIMUM AND 1.3150 INCHES MAXIMUM IN; Internal Clearance: 0.0006 INCHES MINIMUM RADIAL AND 0.0010 INCHES MAXIMUM RADIAL IN; Surface Finish: GROUND. 14 specifications are documented in the U.S. Government catalog.

Is NSN 3110-00-182-8278 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com