The Bearing,ball,annular, cataloged under National Stock Number 3110-00-156-3418, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-00-156-3418 |
| Item Name | Bearing,ball,annular |
| FSC / FSG | 3110 / 31 — Bearings, Antifriction, Unmounted |
| Status | ACTIVE |
| Retainer Fabrication Method | PRESSED |
| Bearing Seal Type | CONTACT |
| Lubrication Material | GREASE |
| Outer Ring Width | 0.3540 INCHES NOMINAL IN |
| Internal Fit-Up Designation | STANDARD |
| Surface Finish | GROUND |
| Shield Quantity | 1 |
| Style Designator | NON-LOADING GROOVE, NON-SEPARABLE |
| Overall Outside Diameter | 30.00 MILLIMETERS NOMINAL MM |
| Bore Shape | STRAIGHT |
| Load Direction | RADIAL |
| Seal Quantity | 1 |
| Standard Tolerance Designation | ABEC NO.1 |
| Bore Diameter | 9.00 MILLIMETERS NOMINAL MM |
| Material | STEEL OUTER RING |
| Material | STEEL INNER RING |
| Material | STEEL RETAINER |
| Material | STEEL BALL |
| Material | STEEL SHIELD |
| Lubrication Material Document and Classification | DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE |
| Inner Ring Width | 0.4800 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 87009 | 3/9 Design control — primary reference General Motors Corp Delco Moraine Ndh Div |
NSN 3110-00-156-3418 is a Bearing,ball,annular, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5905-01-295-6336. Verify interchangeability with system specifications before substitution.
Key specifications for 3110-00-156-3418: Retainer Fabrication Method: PRESSED; Bearing Seal Type: CONTACT; Lubrication Material: GREASE; Outer Ring Width: 0.3540 INCHES NOMINAL IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.