The Bearing,ball,rod End, cataloged under National Stock Number 3110-00-076-2401, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. The manufacturer of record is Northrop Grumman Systems Corporation. Government technical data includes 28 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-00-076-2401 |
| Primary Part Number | 123CM10075-1 |
| Item Name | Bearing,ball,rod End |
| FSC / FSG | 3110 / 31 — Bearings, Antifriction, Unmounted |
| Manufacturer | Northrop Grumman Systems Corporation |
| Status | ACTIVE |
| Shank Diameter | 0.4370 INCHES NOMINAL IN |
| Shank Thread Length | 1.5630 INCHES NOMINAL IN |
| Bearing Seal Type | CONTACT |
| Lubrication Material | GREASE |
| Outer Ring Width | 0.6460 INCHES MINIMUM AND 0.6660 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Style Designator | DOUBLE ROW, STAGGERED, BALL |
| Material Document and Classification | 66 FED STD SINGLE MATERIAL RESPONSE BALL |
| Material Document and Classification | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| Material Document and Classification | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| Material Document and Classification | PLYA-SEALS,FSCM 21335 MFR REF SINGLE MATERIAL RESPONSE SEAL |
| Overall Outside Diameter | 1.2400 INCHES MINIMUM AND 1.2600 INCHES MAXIMUM IN |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.438 INCHES IN |
| Self-Alignment Angle | 10.00 DEGREES NOMINAL |
| Shank Style | EXTERNALLY THREADED |
| Alignment Type | SELF-ALIGNING |
| Surface Treatment | CADMIUM OVERALL |
| Seal Quantity | 2 |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Bore Diameter | 0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN |
| Length From Bore Center to Shank End | 2.4280 INCHES MINIMUM AND 2.4480 INCHES MAXIMUM IN |
| Material | STEEL COMP E52100 BALL |
| Material | RUBBER SYNTHETIC SEAL |
| Material | STEEL COMP E52100 OUTER RING |
| Material | STEEL COMP E52100 INNER RING |
| Material | STEEL ROD END BODY |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 123CM10075-1 PRIMARY | Northrop Grumman Systems Corporation (USA) |
| Reference | Meaning |
|---|---|
| 123CM10075-1 | 5/9 Secondary reference Northrop Grumman Systems Corporation |
NSN 3110-00-076-2401 is a Bearing,ball,rod End, manufactured by Northrop Grumman Systems Corporation, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.
NSN 3110-00-076-2401 has 1 manufacturer part number on file: 123CM10075-1 (Northrop Grumman Systems Corporation).
Key specifications for 123CM10075-1: Shank Diameter: 0.4370 INCHES NOMINAL IN; Shank Thread Length: 1.5630 INCHES NOMINAL IN; Bearing Seal Type: CONTACT; Lubrication Material: GREASE. 28 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.