The Bearing,ball,annular, cataloged under National Stock Number 3110-00-063-9710, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 12 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-00-063-9710 |
| Item Name | Bearing,ball,annular |
| FSC / FSG | 3110 / 31 — Bearings, Antifriction, Unmounted |
| Status | ACTIVE |
| Lubrication Material | OIL |
| Flange Outside Diameter | 0.1690 INCHES MINIMUM AND 0.1710 INCHES MAXIMUM IN |
| Surface Finish | GROUND |
| Style Designator | NON-LOADING GROOVE, NON-SEPARABLE |
| Material Document and Classification | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Bore Shape | STRAIGHT |
| Load Direction | RADIAL |
| Flange Width | 0.0110 INCHES MINIMUM AND 0.0130 INCHES MAXIMUM IN |
| Outer Ring Outside Diameter | 0.1248 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN |
| Bore Diameter | 0.0399 INCHES MINIMUM AND 0.0400 INCHES MAXIMUM IN |
| Material | STEEL COMP 440A OVERALL A |
| Lubrication Material Document and Classification | DC200-20 CS,FSCM 71984 MFR REF SINGLE MATERIAL RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 17493P2 | 1/2 Source control — Government-approved source U.S. Government activity |
| NM030 A57246CR | C/1 Advisory reference — outside the item-of-supply concept General Motors Corp Delco Moraine Ndh Div |
| NM0308A57246C2 | 3/9 Design control — primary reference General Motors Corp Delco Moraine Ndh Div |
NSN 3110-00-063-9710 is a Bearing,ball,annular, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.
Key specifications for 3110-00-063-9710: Lubrication Material: OIL; Flange Outside Diameter: 0.1690 INCHES MINIMUM AND 0.1710 INCHES MAXIMUM IN; Surface Finish: GROUND; Style Designator: NON-LOADING GROOVE, NON-SEPARABLE. 12 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.