PartsTable
Technical Data Sheet
Download PDF

311-6013-000 — PIN,TAPERED,PLAIN

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

311-6013-000: PIN,TAPERED,PLAIN.

The PIN,TAPERED,PLAIN is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL CORROSION RESISTING OVERALL, surface_finish: 63.0 MICROINCHES OUTSIDE DIAMETER, first_end_style: OVAL, hardness_rating: 25.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL, surface_treatment: PASSIVATE OVERALL, first_end_location: BOTH ENDS. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-187-3228, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
311-6013-000
NSN: 5315-00-187-3228
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 13499 — ROCKWELL COLLINS, INC. DBA COLLINS AEROSPACE GOVERNMENT SYSTEMS DIV COLLINS AEROSPACE - GOVERNMENT SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
surface_finish63.0 MICROINCHES OUTSIDE DIAMETER
first_end_styleOVAL
hardness_rating25.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
surface_treatmentPASSIVATE OVERALL
first_end_locationBOTH ENDS
pin_overall_length0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
pin_size_designation6/0
first_end_outer_radius0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
second_end_relationship_with_first_endIDENTICAL
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5315-00-187-3228
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 311-6013-000 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES OUTSIDE DIAMETER
•
FIRST END LOCATION: BOTH ENDS
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
FIRST END STYLE: OVAL
•
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
•
PIN OVERALL LENGTH: 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN SIZE DESIGNATION: 6/0
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER
FIRST END LOCATIONBOTH ENDS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
FIRST END STYLEOVAL
HARDNESS RATING25.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
PIN OVERALL LENGTH0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN SIZE DESIGNATION6/0
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL CORROSION RESISTING OVERALL
SUBSTITUTES & CROSS-REFERENCES 9
A5595C14Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
PNT104-60-32Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SMD198222-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
0404-9Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
NASM24692Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
MS24692-30Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 311-6013-000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 311-6013-000?
311-6013-000 is a PIN,TAPERED,PLAIN.
What parts can replace 311-6013-000?
There are 9 known substitutes for 311-6013-000: A5595C14, PNT104-60-32, SMD198222-2 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 311-6013-000?
311-6013-000 is cataloged in the U.S. Government catalog under NSN 5315-00-187-3228. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 311-6013-000

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.