PartsTable
Technical Data Sheet
PartsTable / MRO / 311-0135-00
311-0135-00 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.312 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.750 INCHES NOMINAL IN, actuator_type: SINGLE SHAFT, body_diameter: 0.188 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-271-6909, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 311-0135-00
NSN: 5315-00-271-6909
FSC: 5315
CAGE: 13499 — ROCKWELL COLLINS, INC. DBA COLLINS AEROSPACE GOVERNMENT SYSTEMS DIV COLLINS AEROSPACE - GOVERNMENT SYSTEMS (USA)
SPECIFICATIONS
body_styleCYLINDRICAL BUSHING MOUNTED
body_length0.312 INCHES NOMINAL IN
shaft_styleROUND, SLOTTED
shaft_length0.750 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter0.188 INCHES NOMINAL IN
shaft_diameter0.125 INCHES NOMINAL IN
mounting_methodSTANDARD BUSHING
section_quantity1
terminal_locationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
nonturn_device_radius0.234 INCHES NOMINAL IN
reliability_indicatorNOT ESTABLISHED
NSN5315-00-271-6909
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 311-0135-00 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
119527Interchangeable
interchangeable cross-reference
interchangeable
311-0281-00Interchangeable
interchangeable cross-reference
interchangeable
311-135Interchangeable
interchangeable cross-reference
interchangeable
311-281Interchangeable
interchangeable cross-reference
interchangeable
1001078Interchangeable
interchangeable cross-reference
interchangeable
GP4-062Z0250-50Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 311-0135-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 311-0135-00?
311-0135-00 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 311-0135-00?
There are 7 known substitutes for 311-0135-00: 119527, 311-0281-00, 311-135 and 4 more. Substitute compatibility should be verified for your specific system.
Is 311-0135-00 still available?
311-0135-00 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 311-0135-00

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026