PartsTable
Technical Data Sheet
Download PDF

310524 — RESISTOR,FIXED,WIRE WOUND,NONIND

✓ Government record, cited
Legrand · MRO · MRO_GENERAL
PRODUCT OVERVIEW

310524: RESISTOR,FIXED,WIRE WOUND,NONIND.

RESISTOR,FIXED,WIRE WOUND,NONIND. Key specifications include body_width: 0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN, end_radius: 0.281 INCHES NOMINAL IN, fork_depth: 0.375 INCHES NOMINAL IN, body_height: 0.100 INCHES NOMINAL0.100 INCHES NOMINAL IN, body_length: 1.620 INCHES NOMINAL1.620 INCHES NOMINAL IN, thread_class: 3A ROD CONNECTION A. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-115-4292, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 310524
NSN: 5340-00-115-4292
NIINs: 001154292, 003506634, 006831915, 012454050
FSC: 5340 — Hardware, Commercial
CAGE: 1UVT5 — BRP US INC (USA)
SPECIFICATIONS
body_width0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN
end_radius0.281 INCHES NOMINAL IN
fork_depth0.375 INCHES NOMINAL IN
body_height0.100 INCHES NOMINAL0.100 INCHES NOMINAL IN
body_length1.620 INCHES NOMINAL1.620 INCHES NOMINAL IN
thread_class3A ROD CONNECTION A
hole_diameter0.256 INCHES MINIMUM AND 0.259 INCHES MAXIMUM IN
overall_width0.562 INCHES NOMINAL IN
terminal_typeTAB, SOLDER LUG
thread_length0.750 INCHES NOMINAL ROD CONNECTION IN
inclosure_typeUNINCLOSEDUNINCLOSED
fork_span_width0.264 INCHES NOMINAL IN
NSN5340-00-115-4292
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 310524 MFR: Legrand ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 0.264 INCHES NOMINAL IN
•
SECURING PIN HOLE DIAMETER: 0.257 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.149 INCHES NOMINAL IN
•
OVERALL DIAMETER: 0.750 INCHES NOMINAL IN
•
END RADIUS: 0.281 INCHES NOMINAL IN
•
THREAD LENGTH: 0.750 INCHES NOMINAL ROD CONNECTION IN
•
STYLE DESIGNATOR: CLEVIS
•
THREAD PITCH DIAMETERS: +0.2175 TO 0.2201 INCHES ROD CONNECTION IN
TECHNICAL CHARACTERISTICS
FORK SPAN WIDTH0.264 INCHES NOMINAL IN
SECURING PIN HOLE DIAMETER0.257 INCHES NOMINAL IN
FORK ARM THICKNESS0.149 INCHES NOMINAL IN
OVERALL DIAMETER0.750 INCHES NOMINAL IN
END RADIUS0.281 INCHES NOMINAL IN
THREAD LENGTH0.750 INCHES NOMINAL ROD CONNECTION IN
STYLE DESIGNATORCLEVIS
THREAD PITCH DIAMETERS+0.2175 TO 0.2201 INCHES ROD CONNECTION IN
OVERALL WIDTH0.562 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 310524?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 310524?
310524 is a RESISTOR,FIXED,WIRE WOUND,NONIND manufactured by Legrand. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 310524?
310524 is cataloged in the U.S. Government catalog under NSN 5340-00-115-4292. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 310524

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.