PartsTable
Technical Data Sheet
Download PDF

310010 ITEM 10 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

310010 ITEM 10: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC AND STEEL OVERALL, case_style: SHOULDERED, seal_width: 9.970 INCHES NOMINAL IN, end_item_identification: 5 IN FLEXIBLE CONNECTION TISIC-2A,TYPE 1 TEP A, accommodated_shaft_diameter: 5.047 INCHES NOMINAL IN, part_name_assigned_by_controlling_agency: MOLDED SEAL ASSEMBLY. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-497-0962, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
310010 ITEM 10
NSN: 5330-01-497-0962
FSC: 5330 — Packing and Gasket Materials
CAGE: 18444 — OIL STATES INDUSTRIES, INC. DIV SPECIAL PRODUCTS DIV (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC AND STEEL OVERALL
case_styleSHOULDERED
seal_width9.970 INCHES NOMINAL IN
end_item_identification5 IN FLEXIBLE CONNECTION TISIC-2A,TYPE 1 TEP A
accommodated_shaft_diameter5.047 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyMOLDED SEAL ASSEMBLY
NSN5330-01-497-0962
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 310010 ITEM 10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 9.970 INCHES NOMINAL IN
•
CASE STYLE: SHOULDERED
•
ACCOMMODATED SHAFT DIAMETER: 5.047 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC AND STEEL OVERALL
TECHNICAL CHARACTERISTICS
SEAL WIDTH9.970 INCHES NOMINAL IN
CASE STYLESHOULDERED
ACCOMMODATED SHAFT DIAMETER5.047 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYMOLDED SEAL ASSEMBLY
END ITEM IDENTIFICATION5 IN FLEXIBLE CONNECTION TISIC-2A,TYPE 1 TEP A
MATERIALRUBBER SYNTHETIC AND STEEL OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 310010 ITEM 10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 310010 ITEM 10?
310010 ITEM 10 is a SEAL,PLAIN ENCASED.
What is the NSN for 310010 ITEM 10?
310010 ITEM 10 is cataloged in the U.S. Government catalog under NSN 5330-01-497-0962. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 310010 ITEM 10