The Legrand UPS Keor Multiplug model is an uninterruptible power source with stand by technology. It delivers a rated power of 600VA and 800VA, it is CPU-controlled and is equipped, internally, with valve-regulated, hermetically sealed lead accumulator batterie to guarantee a minimum uptime of 10 minutes with one typical workstation. Keor Multiplug provides effective protection against any interference in the electrical mains.
It also guarantees an uninterrupted power supply, thanks to the RJ11/ RJ45 sockets, offering excellent telephone/fax/modem/LAN protection.<br><br>The UPS can be connected to a PC through the USB port allowing you to monitor its operation, thanks to the free software, and carry out an emergency shutdown of Windows operating system.<br><br>Keor Multiplug is managed by a microprocessor and is able to display the following alarms and operating modes through two status LEDs:<br>- normal operation<br>- battery-powered operation<br>- overloaded<br>- generic anomaly<br>- This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-282-7125, indicating validated use in U.S. government and defense logistics supply chains.
| material | PLASTIC CASE |
| ring_style | EXTERNAL |
| reset_method | MANUAL |
| usage_design | EXTERNAL |
| pole_quantity | 3 |
| inside_diameter | 0.361 INCHES MINIMUM AND 0.368 INCHES MAXIMUM IN |
| major_thickness | 0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN |
| trip_release_method | MAGNETIC-HYDRAULIC ALL LOCATIONS |
| casehardening_indicator | NOT CASEHARDENED |
| circuit_protection_type | OVERCURRENT ALL LOCATIONS |
| material_hardness_rating | 69.5 ROCKWELL SUPERFICIAL 30-N MINIMUM AND 73.0 ROCKWELL SUPERFICIAL 30-N MAXIMUM |
| terminal_type_and_quantity | 6 SCREW |
| NSN | 5325-00-282-7125 |
| CASEHARDENING INDICATOR | NOT CASEHARDENED |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66,FS1066 TO 1090 FED STD SINGLE MATERIAL RESPONSE |
| CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| MAJOR THICKNESS | 0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN |
| MATERIAL HARDNESS RATING | 69.5 ROCKWELL SUPERFICIAL 30-N MINIMUM AND 73.0 ROCKWELL SUPERFICIAL 30-N MAXIMUM |
| USAGE DESIGN | EXTERNAL |
| INSIDE DIAMETER | 0.361 INCHES MINIMUM AND 0.368 INCHES MAXIMUM IN |
| RING STYLE | EXTERNAL |