PartsTable
Technical Data Sheet
Download PDF

310-0468-050 — WASHER,SPRING TENSION

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

310-0468-050: WASHER,SPRING TENSION.

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 301 OVERALL, hole_diameter: 0.190 INCHES MINIMUM AND 0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM0.196 INCHES MAXIMUM IN, overall_height: 0.040 INCHES MINIMUM AND 0.040 INCHES MINIMUM AND 0.070 INCHES MAXIMUM0.070 INCHES MAXIMUM IN, outside_diameter: 0.297 INCHES MINIMUM AND 0.297 INCHES MINIMUM AND 0.307 INCHES MAXIMUM0.307 INCHES MAXIMUM IN, style_designator: SPRING TENSION, surface_treatment: PASSIVATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-070-8189, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
310-0468-050
NSN: 5310-01-070-8189
FSC: 5310 — Nuts and Washers
CAGE: 86928 — SEASTROM MANUFACTURING CO INC (USA)
SPECIFICATIONS
materialSTEEL COMP 301 OVERALL
hole_diameter0.190 INCHES MINIMUM AND 0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM0.196 INCHES MAXIMUM IN
overall_height0.040 INCHES MINIMUM AND 0.040 INCHES MINIMUM AND 0.070 INCHES MAXIMUM0.070 INCHES MAXIMUM IN
outside_diameter0.297 INCHES MINIMUM AND 0.297 INCHES MINIMUM AND 0.307 INCHES MAXIMUM0.307 INCHES MAXIMUM IN
style_designatorSPRING TENSION
surface_treatmentPASSIVATE OVERALL
material_thickness0.009 INCHES MINIMUM AND 0.009 INCHES MINIMUM AND 0.011 INCHES MAXIMUM0.011 INCHES MAXIMUM IN
material_document_and_classificationQQ-S-766 COND 1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-070-8189
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 310-0468-050 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
STYLE DESIGNATOR: SPRING TENSION
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-766 COND 1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.297 INCHES MINIMUM AND 0.297 INCHES MINIMUM AND 0.307 INCHES MAXIMUM0.307 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.009 INCHES MINIMUM AND 0.009 INCHES MINIMUM AND 0.011 INCHES MAXIMUM0.011 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: STEEL COMP 301 OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.040 INCHES MINIMUM AND 0.040 INCHES MINIMUM AND 0.070 INCHES MAXIMUM0.070 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLE DESIGNATORSPRING TENSION
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766 COND 1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.297 INCHES MINIMUM AND 0.297 INCHES MINIMUM AND 0.307 INCHES MAXIMUM0.307 INCHES MAXIMUM IN
MATERIAL THICKNESS0.009 INCHES MINIMUM AND 0.009 INCHES MINIMUM AND 0.011 INCHES MAXIMUM0.011 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 301 OVERALL
HOLE DIAMETER0.190 INCHES MINIMUM AND 0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM0.196 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 310-0468-050?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 310-0468-050?
310-0468-050 is a WASHER,SPRING TENSION.
What is the NSN for 310-0468-050?
310-0468-050 is cataloged in the U.S. Government catalog under NSN 5310-01-070-8189. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 310-0468-050

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.