PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 310-0058-00
310-0058-00 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, thickness: 0.036 INCHES NOMINAL IN, hole_diameter: 0.167 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN, overall_diameter: 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN, surface_treatment: NICKEL OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-059-8417, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
310-0058-00
NSN: 5310-00-059-8417
FSC: 5310
CAGE: 79807 — WROUGHT WASHER MFG., INC. (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
thickness0.036 INCHES NOMINAL IN
hole_diameter0.167 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN
overall_diameter0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN
surface_treatmentNICKEL OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-00-059-8417
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 310-0058-00 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: NICKEL OVERALL
•
HOLE DIAMETER: 0.167 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
THICKNESS: 0.036 INCHES NOMINAL IN
•
OVERALL DIAMETER: 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTNICKEL OVERALL
HOLE DIAMETER0.167 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY OVERALL
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.036 INCHES NOMINAL IN
OVERALL DIAMETER0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
N80P9006Q3Interchangeable
interchangeable cross-reference
interchangeable
MS35206-215Interchangeable
interchangeable cross-reference
interchangeable
558363-17Interchangeable
interchangeable cross-reference
interchangeable
807906-00Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 310-0058-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 310-0058-00?
310-0058-00 is a WASHER,FLAT.
What parts can replace 310-0058-00?
There are 4 known substitutes for 310-0058-00: N80P9006Q3, MS35206-215, 558363-17 and 1 more. Substitute compatibility should be verified for your specific system.
Is 310-0058-00 still available?
310-0058-00 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 310-0058-00

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026