PartsTable
Technical Data Sheet
PartsTable / MRO / 31-933
31-933 ✓ Verified by PartsTable
Lindy · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

This high quality adapter complies with USB 1.1, USB 2.0 and USB On-The-Go (OTG) specifications. Supporting data transfer speeds up to 480Mbit/sec, it is fully compatible with all USB and USB OTG devices. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-4488, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 31-933
NSN: 3110-00-100-4488
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
colorAMBER LENS
length10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
materialALUMINUM ALLOY 7075
cup_width0.9375 INCHES NOMINAL IN
cone_width1.1875 INCHES NOMINAL IN
bore_diameter1.2500 INCHES NOMINAL IN
overall_width2.300 INCHES NOMINAL IN
heat_treatmentT-6 SOLUTION HEAT TREATED
overall_length0.781 INCHES NOMINAL IN
standout_width0.2500 INCHES NOMINAL IN
first_tip_styleSQUARE W/ INNER AND OUTER CORNER RADII
mounting_methodPRESS FIT
NSN3110-00-100-4488
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 31-933 · Lindy ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUP WIDTH: 0.9375 INCHES NOMINAL IN
•
BORE DIAMETER: 1.2500 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 2.8593 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
CONE WIDTH: 1.1875 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.2500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CUP WIDTH0.9375 INCHES NOMINAL IN
BORE DIAMETER1.2500 INCHES NOMINAL IN
OVERALL WIDTH1.1875 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER2.8593 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
CONE WIDTH1.1875 INCHES NOMINAL IN
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
STANDOUT WIDTH0.2500 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
31-0933-300Interchangeable
interchangeable cross-reference
interchangeable
31-933Interchangeable
interchangeable cross-reference
interchangeable
AMS-STD-184Interchangeable
interchangeable cross-reference
interchangeable
60-8679Interchangeable
interchangeable cross-reference
interchangeable
AMS-QQ-A-200/11Interchangeable
interchangeable cross-reference
interchangeable
0125373-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 31-933?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 31-933?
31-933 is a PARTS KIT,LINEAR ACTUATING CYLIN manufactured by Lindy. It is classified as a MRO (MRO_GENERAL).
What parts can replace 31-933?
There are 16 known substitutes for 31-933: 31-0933-300, 31-933, AMS-STD-184 and 13 more. Substitute compatibility should be verified for your specific system.
Is 31-933 still available?
31-933 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 31-933

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026