PartsTable
Technical Data Sheet
Download PDF

31-1007 — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

31-1007: RESISTOR,VARIABLE,NONWIRE WOUND,.

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include shape: IRREGULAR, material: PLASTIC POLYCARBONATE BODY, body_style: TUBE TYPE, lens_color: GREEN AND RED, body_length: 1.266 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-236-6295, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 31-1007
NSN: 5340-00-236-6295
NIINs: 002366295, 010809785, 012580617, 014137747, 015765691, 016948154
FSC: 5340 — Hardware, Commercial
CAGE: 35301 — DRESSER INDUSTRIES INC LEROI DIV (USA)
SPECIFICATIONS
shapeIRREGULAR
materialPLASTIC POLYCARBONATE BODY
body_styleTUBE TYPE
lens_colorGREEN AND RED
body_length1.266 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
shaft_length0.500 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter1.094 INCHES NOMINAL IN
lip_thickness0.125 INCHES NOMINAL IN
inclosure_typeENCASED
overall_height0.250 INCHES NOMINAL IN
NSN5340-00-236-6295
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 31-1007 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE DIAMETER: 2.125 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.063 INCHES NOMINAL IN
•
BODY OUTSIDE DIAMETER: 1.830 INCHES NOMINAL IN
•
STYLE DESIGNATOR: IRREGULAR
•
BODY INSIDE DIAMETER: 1.562 INCHES NOMINAL IN
•
CASEHARDENING INDICATOR: NOT CASEHARDENED
•
LIP THICKNESS: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FLANGE DIAMETER2.125 INCHES NOMINAL IN
OVERALL HEIGHT0.250 INCHES NOMINAL IN
FLANGE THICKNESS0.063 INCHES NOMINAL IN
BODY OUTSIDE DIAMETER1.830 INCHES NOMINAL IN
STYLE DESIGNATORIRREGULAR
BODY INSIDE DIAMETER1.562 INCHES NOMINAL IN
CASEHARDENING INDICATORNOT CASEHARDENED
LIP THICKNESS0.125 INCHES NOMINAL IN
MATERIALSTEEL
END HOLE DIAMETER0.328 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 31-1007?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 31-1007?
31-1007 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 31-1007?
31-1007 is cataloged in the U.S. Government catalog under NSN 5340-00-236-6295. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 31-1007

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.