PartsTable
Technical Data Sheet
Download PDF

30P566 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

30P566: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER OVERALL, hole_diameter: 0.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.406 INCHES NOMINAL IN, overall_length: 5.680 INCHES NOMINAL IN, cross-sectional_thickness: 0.025 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-040-2546, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
30P566
NSN: 5330-00-040-2546
FSC: 5330 — Packing and Gasket Materials
CAGE: 81240 — WHITE FARM EQUIPMENT CO SUB OF TIC INVESTMENT INC (USA)
SPECIFICATIONS
materialPAPER OVERALL
hole_diameter0.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width4.406 INCHES NOMINAL IN
overall_length5.680 INCHES NOMINAL IN
cross-sectional_thickness0.025 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-040-2546
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 30P566 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.025 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL: PAPER OVERALL
•
HOLE DIAMETER: 0.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.025 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
OVERALL LENGTH5.680 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH4.406 INCHES NOMINAL IN
MATERIALPAPER OVERALL
HOLE DIAMETER0.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 5
807476Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
00807476Reference document
Same NSN cross-reference
Reference document — Secondary reference
TL-129000Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
8329725Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
125026Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 30P566?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30P566?
30P566 is a GASKET.
What parts can replace 30P566?
There are 5 known substitutes for 30P566: 807476, 00807476, TL-129000 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 30P566?
30P566 is cataloged in the U.S. Government catalog under NSN 5330-00-040-2546. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30P566