PartsTable
Technical Data Sheet
Download PDF

30L1-4 — CATCH,CLAMPING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

30L1-4: CATCH,CLAMPING.

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include material: ALUMINUM BASE, design_type: CLAW ENGAGING, hole_diameter: 0.100 INCHES NOMINAL IN, overall_width: 0.780 INCHES NOMINAL IN, overall_height: 0.067 INCHES NOMINAL IN, overall_length: 1.580 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-812-5393, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
30L1-4
NSN: 5340-00-812-5393
FSC: 5340 — Hardware, Commercial
CAGE: 71286 — HOWMET GLOBAL FASTENING SYSTEMS INC DIV CAMLOC PRODUCTS (USA)
SPECIFICATIONS
materialALUMINUM BASE
design_typeCLAW ENGAGING
hole_diameter0.100 INCHES NOMINAL IN
hole_quantity2
overall_width0.780 INCHES NOMINAL IN
overall_height0.067 INCHES NOMINAL IN
overall_length1.580 INCHES NOMINAL IN
operation_methodLEVER HANDLE
style_designatorLEVER
surface_treatmentCADMIUM LEVER
engaging_surface_width0.434 INCHES MINIMUM AND 0.466 INCHES MAXIMUM IN
engaging_surface_thickness0.071 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
NSN5340-00-812-5393
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 30L1-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: CLAW ENGAGING
•
ENGAGING SURFACE WIDTH: 0.434 INCHES MINIMUM AND 0.466 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: LEVER
•
SURFACE TREATMENT: CADMIUM LEVER
•
ENGAGING SURFACE THICKNESS: 0.071 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.067 INCHES NOMINAL IN
DESIGN TYPECLAW ENGAGING
ENGAGING SURFACE WIDTH0.434 INCHES MINIMUM AND 0.466 INCHES MAXIMUM IN
STYLE DESIGNATORLEVER
OVERALL LENGTH1.580 INCHES NOMINAL IN
OVERALL WIDTH0.780 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM LEVER
ENGAGING SURFACE THICKNESS0.071 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
MATERIALALUMINUM BASE
MATERIALSTEEL LEVER
SUBSTITUTES & CROSS-REFERENCES 3
5340008125393Reference document
Same NSN cross-reference
Reference document — Secondary reference
SCB613981Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
C5-15-4341-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 30L1-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30L1-4?
30L1-4 is a CATCH,CLAMPING.
What parts can replace 30L1-4?
There are 3 known substitutes for 30L1-4: 5340008125393, SCB613981, C5-15-4341-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 30L1-4?
30L1-4 is cataloged in the U.S. Government catalog under NSN 5340-00-812-5393. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30L1-4