PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 30G
30G ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The HOOD,SAND BLAST is a the manufacturer industrial component. Key specifications include scale_range: +0.0 TO 30.0 DEGREES SINGLE INDICATOR SINGLE SCALE, usage_design: ANGLE OF ATTACK, scale_marking: NUMERALS, pointer_finish: NONLUMINOUS, pointer_purpose: ANGLE OF ATTACK, special_features: 1 SCALE AZIMUTH ANGLE; SCALE SMALLEST INCREMENT GRADUATION 1 DEG; 1 POINTER; PLATE MOUNTING METHOD. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3391, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
30G
NSN: 5315-00-010-3391
FSC: 5315
CAGE: 95019 — DANA CORP SPICER TRANSMISSION DIV (USA)
SPECIFICATIONS
scale_range+0.0 TO 30.0 DEGREES SINGLE INDICATOR SINGLE SCALE
usage_designANGLE OF ATTACK
scale_markingNUMERALS
pointer_finishNONLUMINOUS
pointer_purposeANGLE OF ATTACK
special_features1 SCALE AZIMUTH ANGLE; SCALE SMALLEST INCREMENT GRADUATION 1 DEG; 1 POINTER; PLATE MOUNTING METHOD
fsc_application_dataPANEL,INDICATOR 3A9
scale_marking_transparencyNONLUMINOUS
NSN5315-00-010-3391
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 30G · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONDEFINITIVE SPEC/STD DATA: B TYPE
•
STYLE DESIGNATOR: STANDARD
•
UNDERLOOP LENGTH: 2.500 INCHES NOMINAL IN
•
DIAMETER: 0.125 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
NONDEFINITIVE SPEC/STD DATAB TYPE
STYLE DESIGNATORSTANDARD
UNDERLOOP LENGTH2.500 INCHES NOMINAL IN
DIAMETER0.125 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
7535Interchangeable
interchangeable cross-reference
interchangeable
MILP43253Interchangeable
interchangeable cross-reference
interchangeable
7220Interchangeable
interchangeable cross-reference
interchangeable
14-64912-1Interchangeable
interchangeable cross-reference
interchangeable
30GInterchangeable
interchangeable cross-reference
interchangeable
6722Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 30G?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30G?
30G is a HOOD,SAND BLAST.
What parts can replace 30G?
There are 22 known substitutes for 30G: 7535, MILP43253, 7220 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 30G?
30G is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3391. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30G

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026