PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 30A014
30A014 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The LATCH,RIM is a the manufacturer industrial component. Key specifications include material: STEEL CASE, bolt_type: REGULAR BEVEL, action_type: SPRING, operation_method: PULL RING LATCH BOLT, special_features: HOLE SPACING:1.281 IN.;HOLE DIAMETER:0.188 IN. IN, surface_treatment: CADMIUM CASE.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-240-2378, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
30A014
NSN: 5340-00-240-2378
FSC: 5340
CAGE: 26916 — NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN SYSTEMS CORP DIV MULTIPLE (USA)
SPECIFICATIONS
materialSTEEL CASE
bolt_typeREGULAR BEVEL
action_typeSPRING
operation_methodPULL RING LATCH BOLT
special_featuresHOLE SPACING:1.281 IN.;HOLE DIAMETER:0.188 IN. IN
surface_treatmentCADMIUM CASE
mounting_hole_quantity2
NSN5340-00-240-2378
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 30A014 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPERATION METHOD: PULL RING LATCH BOLT
•
BOLT TYPE: REGULAR BEVEL
•
MATERIAL: STEEL CASE
•
MOUNTING HOLE QUANTITY: 2
•
SURFACE TREATMENT: CADMIUM CASE
•
ACTION TYPE: SPRING
TECHNICAL CHARACTERISTICS (FLIS)
OPERATION METHODPULL RING LATCH BOLT
SPECIAL FEATURESHOLE SPACING:1.281 IN.;HOLE DIAMETER:0.188 IN. IN
BOLT TYPEREGULAR BEVEL
MATERIALSTEEL CASE
MOUNTING HOLE QUANTITY2
SURFACE TREATMENTCADMIUM CASE
ACTION TYPESPRING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
1-5631Interchangeable
interchangeable cross-reference
interchangeable
A67161Interchangeable
interchangeable cross-reference
interchangeable
32E17Interchangeable
interchangeable cross-reference
interchangeable
S1563Interchangeable
interchangeable cross-reference
interchangeable
S1563ISSUE3Interchangeable
interchangeable cross-reference
interchangeable
103-5120Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 30A014?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30A014?
30A014 is a LATCH,RIM.
What parts can replace 30A014?
There are 16 known substitutes for 30A014: 1-5631, A67161, 32E17 and 13 more. Substitute compatibility should be verified for your specific system.
Is 30A014 still available?
30A014 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30A014

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026